• gerber infinity ii plotter manual

    Download Link: ➡ gerber infinity ii plotter manual



    File Name: gerber infinity ii plotter manual.pdf
    Size: 1326 KB
    Type: PDF, ePub, eBook
    Category: Book
    Uploaded: 3 May 2019, 15:43 PM
    Rating: 4.6/5 from 823 votes.


    Last checked: 13 Minutes ago!









    ⬆ LINK ⬆




















    In order to read or download gerber infinity ii plotter manual ebook, you need to create a FREE account.

    eBook includes PDF, ePub and Kindle version



    ✔ Register a free 1 month Trial Account.
    ✔ Download as many books as you like (Personal use)
    ✔ Cancel the membership at any time if not satisfied.
    ✔ Join Over 80000 Happy Readers


    Book Descriptions:

    gerber infinity ii plotter manual

    Exam: lectra made like a printer, you Will map printer in gerber machine and you set winplot hpgl plotter. 3. Write a batch file command, Using send.exe send.exe has Got same parametric function. I Will write when i check it. This is the best way. Can you share how do you organized direct plot from optitex. For an accumark you may to try 2 alternative ways: 1. If CE6000 has windows driver and present on dest PC as printer in devices. Map this printer to accumark's PC. Here is configure mapped CE6000 as local plotter via windriver on accumark's PC. 2. Install there just winplot on Lectra's PC. Next you've to configure semi accumark's network (i mean PEER or SERV topology) to allow remote accumark's PC(s) plot on CE6000. But there can be conflicts beetwen WinPlot and Lectra plottings software. The easy way to understand what is the best yuo've to unswer how do you organized direct plot from optitex. And, may be, remote connection to Lectra's and AccuMark's PSc to check all I remember that we can set only one tool. But the plotter has two tools Second, if the plan to service with winplot.Optiplan can create hpgl file to send winplot.Cos my suggestion for common use is windowsdriver. Sure if last one installed. So major question how it works now.Lectra can be send directly to plot and also gerber can be too. Lastly you will set PEER or Serv seting.I remember that we can set only one tool. But the plotter has two tools Second, if the plan to service with winplot.Optiplan can create hpgl file to send winplot.I shared plotter and connected on Gerber's PC but every time connect successfully, the plotter will stop working on Lectra's PC. I must restart PC to fix it.But you will decied that the plotter connect i which department. Lectra can be send directly to plot and also gerber can be too. Lastly you will set PEER or Serv seting.In this case i prefer you short (without space) name. And configure This printer as local nonaccumark's plotter.

    • gerber infinity ii plotter manual user, gerber infinity ii plotter manual download, gerber infinity ii plotter manual pdf, gerber infinity ii plotter manual instructions.

    Please upgrade your browser to improve your experience. Please enable JavaScript to improve your browsing experience. We accomplish this through a global network of highly skilled technical support staff and by providing the most comprehensive service offerings, highest quality consumables and aftermarket products available today. Gerber Service is there to keep your business thriving in today's competitive environment. Join our Community to also get support and ask questions of our members. Using the phone’s camera, speaker and screen, we can see the issue and guide you through a troubleshooting process. Eliminate hours of exchanging calls with our Service team to diagnose your issue more quickly. Talk to a customer service representative for more information. Learn more. For details, click here. Please upgrade your browser to improve your experience. Sign up and enroll for the May 15th class on GerberU.com! The plotter is connected another PC (it does not use Gerber). How can to connect the plotter and plot directly from my PC? It either receives the file using Winplot or your CAD system's native interface. I already setted up for a PC can direct plot (using Optitex) but with Gerber I don't know how. In your case i suppose to generate plot files and to plot via graphtec software. Is it case with optitex. What kind of assistance you need: how generate plot files on accumark, how transfer last ones via network to destination pc with graphtec, or.? And you configre hpglplot software to auto read to send plot. Graphtec's usb plugged in Lectra PC, they save to.HPGL file and use Send.exe to send to plotter.Thank This is send.exe I shared plotter and connect on Gerber PC but in output don't have. I suggest three way to send plotter. I write options easy way to Hard. 1. using hpglplot software, you should talk lectra team to instalition. You Will find exam configration.pdf that is shared before. 2. Using winplot with hp hpgl plotter to mapping printer in lectra system.

    To install the Gerber P2C USB driver in Windows XP 1 Connect one end of the supplied USB cable into the USB port on the back of your Gerber P2C plotter and connect the other end to a USB port on your Windows XP computer. 2 Plug the Gerber P2C plotter into a power source and turn on the plotter. The Please wait while the wizard installs the software message displays. 4 Upon completion of the USB driver installation the Completing the Found New Hardware Wizard dialog box displays. If you are using Gerber OMEGA Software, follow the detailed instructions in Installing Gerber P2C Plotters on page 7. To install the Gerber P2C USB driver in Windows Connect one end of the supplied USB cable into the USB port on the back of your Gerber P2C plotter and connect the other end to a USB port on your Windows 2000 computer. 2 Plug the Gerber P2C plotter into a power source and turn on the plotter. Choose the option: Display a list of known drivers for this device so that I can choose a specific driver. Turn on the CD-ROM option. 5 Insert the Gerber P2C Driver Disk that was included with your plotter in the CD-ROM drive of your computer. When installation is complete the following dialog box displays.If you are using Gerber OMEGA Software, follow the detailed instructions in Installing Gerber P2C Plotters on page 7. To install the Gerber P2C USB driver in Windows 98 1 Connect one end of the supplied USB cable into the USB port on the back of your Gerber P2C plotter and connect the other end to a USB port on your Windows 98 computer. 2 Plug the Gerber P2C plotter into a power source and turn on the plotter. Choose the option: Display a list of all the drivers in a specific location so you can select the driver you want. Click the Have Disk button display the Open dialog box.The driver file P2CUSB.inf displays in the File Name window. The following dialog box displays. 10 Click Finish to close the Add New Hardware Wizard.

    Find proper procedure in confignotes. Look in attachments. Also a documents i share is in Dos folder of intallation packet. 2. Here you'll need to reconfigure Lectra and Optitex to generetae HPGL files in specific folder. And WinPlot will plot it automatically. Install Winplot on Lectra PC. But instead this i whould just connect plotter to accumarks PC. Configure plotter as SP120 and try plot any piece. If you ger success then activate Spooller to auto plot hpgl files from specific folder. Find spooller options in Winplot Configuration in Windos control pannel. Next you need configure Lectra and optitex to generate files in this folder. Some instruction i find in AccuMark's docs folder and attach. PS: If you have few accumark's PSc then you need to organize network plotter's enviroments.You need map CE6000 to Gerber's PC. In this case i prefer you short (without space) name. Also a documents i share is in Dos folder of intallation packet. Like ce6000. I got some issue in past. But then issue was possible with winxp or old version of accumark How many AccuMark's PC you have? From my experience. Better if plotter's share had short name, no spaces. Like ce6000. I got some issue in past. But then issue was possible with winxp or old version of accumark How many AccuMark's PC you have? Like overflow memory, or can not spool. But have some suggestion. As well you use windows driver there shouldn't be issue on AM side. Let investigate Do you map Printer and configure as local plotter for 1 PC. Can it to plot successefully. Somescreen short with windows printer section, plotter configuration??? or remote assystance? If you want to get involved, click one of these buttons. The following procedures describe installing the USB drivers using the Windows New Hardware Wizard for Windows XP, Windows 2000, and Windows 98 computers. You will need the Gerber P2C Driver Disk to complete the procedure.

    Packing INFINITY Series Acquisition Tools Manual Access between the instrument and a PC through the USB cable supplied by us as The stack has limited support for Bluetooth applications compared to other Windows-based Use the phone cord included to connect to the phone jack Key Features and No part of this publication may be reproduced in NOTE: The form of the USB converter may vary, so the unit you receive may not be identical to the one displayed here. Step 2 Plug the USB Connector of the All rights reserved. KYOCERA is a registered trademark of Kyocera Corporation. All other trademarks are the property of their respective Contents: Chapter 1: Introduction. 3 1.1 Product Introduction. 3 However, more current versions of Microsoft Windows, Keep the manual handy for future use. Introduction Thank you for purchasing Matrix Multimedia USB PICmicro programmer boards with Firmware version 7 or later All rights reserved. Software Migration Guide 1 Table of Contents Introduction. 3 Changes to Metrics ICS This User Guide provides step by step instructions that will take you through All rights are reserved. No one is permitted to reproduce or duplicate, in any form, this manual or any part thereof without Paper support Printer Manual Power cord Ink cartridges CD-ROM 2 Remove all the blue tape This Quick T u t o r i a l LIT-12011665 Issued December 5, 2014 Refer to the QuickLIT website for the most up-to-date For Mini-Z MR-03VE Series models VE Manager Software Manual Instruction Manual This product is used to connect Mini-Z To use this website, you must agree to our Privacy Policy, including cookie policy. Parts Gerber Edge Printer. Gerber Plotter,Flexisign Window tint, etc. The Plotter Doctor has been selling and repairing Gerber products since 1985. We have other parts available as well. Shipping: we ship world-wide. Price is calculated based on your location. The Plotter Doctor 562-633-4132 We have other parts available as well.

    11 Install the Gerber P2C plotter in your software according to the software manufacturer's instructions.In this procedure you will verify your OMEGA version and install a Gerber P2C plotter in OMEGA via the USB or serial port. To install a Gerber P2C Plotter 1 EnsurethatOMEGA2.02ServicePack3orhigherisinstalledonyourcomputer. Right click the GSPTray icon on the right side of the task bar and choose About Gerber System Tray. 2 Make note of the RBase value which must be or higher. Preference to automatically choose this plotter when outputting jobs from OMEGA. 12 Click Close if you are finished installing plotters. Copyright 2004 Gerber Scientific International. Gerber P2C and OMEGA are trademarks of Gerber Scientific Products. Windows is a registered trademark of Microsoft Corporation in the US and other countries. This driver is compatible with: Windows XP Service Pack 2, Windows 2000 Service Pack 4, DO NOT download drivers from Quick Network Setup Guide This Quick Network Note: Installation instructions for Windows Your new device programmer was designe d to provid e years of suppor t for Your new device programmer was designe d to provid e years of suppor t for thousand s of devices, with the use of optional socket Quick Start Not all of these drivers are compatible with our software. If you are experiencing communications Instructions for connecting Blackberry hand-held devices to Aliant Hosted Exchange No part of this book may be reproduced or transmitted in any form or by any means, electronic Product Name: Elo 1725L 17- inch Monitor All rights reserved. This documentation is an unpublished work For printer sharing to operate correctly, please be sure You need these utilities for your printer and computer However, these instructions apply to Data Services Manual Quick Installation Guide V1.0 All brand names or trademarks are the property of their respective owners.

    SHIPPING INFO Our goal is to ship your item within 1-2 business days after payment has cleared. Freight items may take 2-3 business days. For your and our safety, we only ship to the confirmed Paypal address(AKA billing address) if you choose that option. Need it shipped elsewhere. Pay via cashiers check.However in the event that an item is damaged during transit, buyer must notate that with the driver before signing for the package. Keep the box and all packaging mater Manufacturer: Gerber Model: 750 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Gerber Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: This item was not fully tested. Since we do not have the proper resources. The cover has a crack in it and the left corner of the case has a piece broken off, as seen in the pictures. When powered on the plotter went through its self-test, aligned the cutting head and then displayed the main menu. We were able to toggle through several of the function pages, as seen in the pictures. We got the roller to.No further testing was performed. This item does not come equipped with any cutting assemblies, vinyl roll bars, cutting assembly cover or software. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms One of the best cutter plotter on the market, cuts fast and accurate. Cutter operates without any issues. Was not heavily used, Rubber on friction wheels is in great condition. Automatically aligns media so that printed graphics can be accurately contour cut. Includes: manual. powercord. software not included. Please ask any questions prior to bidding. Sell to the lower 48 states of the continental US only. No international please.

    Gerber ODYSSEY 52 Vinyl Cutter Plotter The Gerber ODYSSEY with GerberDrive is a breakthrough. First-of-its-kind plotter which combines the ultra-precise tracking of a sprocket-feed plotter with media-width flexibility.. more Providing extreme accuracy in material tracking and alignment demanded by sign shops for long signs and unattended operation. This 48” engineering marvel offers the best of all worlds.Gerber enVision plotter with eye piece in excellent condition. Gerber Edge 2 printer in excellent condition. Software included on a Dell PC. Keyboard, mouse, HP flat screen monitor. Local pick up and serious offers only. This is a package deal and I prefer not to split them up. Feel free to ask any questions and I will be glad to coordinate a time to demonstrate the machines for you. Posted with Just send me a message. OEM USB Dongle Note: The Omega 1.56 CD has some minor scratches but installs properly. There is a second copy of the disk with this package. I am selling this fully tested set simply because I have an extra set of Omega which I currently use. Note that you will need to sign for this upon delivery. Both are in excellent condition, and work with no issues. The plotter has a new drum recently installed from plotterdoctor which has a 5 year warranty, Will include 35 different foils for the printer, Most are new, and the roll holder for the printer. Also included is the serial cable for the plotter( this one is hard to find) Let me know if you have any questions. Shipping is free through fedex ground with full insurance. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items. Cutter operates without any issues and is in great condition. Purchased less than one month ago from original owner who used it very lightly. Decided to go with a smaller model. Power cord and parallel to usb included. Software is not included. Will ship for free to US 48 states Posted with Please see pictures.

    The Plotter Doctor 562-633-4132 Roland Graphtec Mimaki SignPal Ioline Pcut Durability, super strength abrasive carbide cutting tools. Product Description Premium class plotter blade.. more Product line covers wide selection vinyl cutting plotter. Made from costly. Ultra strength, extremely wear-resistance, shock resistance quality cemented carbide material. Heavy duty material. Enjoy Top Quality Plotter Blade- photo for reference only.These belts are brand new. Not used, and we warranty them for 1 year. The Plotter Doctor has been selling.We have other parts available as well. http:www.theplotterdoctor.com Shipping: we ship world-wide. Warranty: 1 year Jim 562-633-4132 Powered by The free listing tool. List your items fast and easy and manage your active items. Single or low-ply static cutter, designed to cut a wide variety of materials.Shipping charges are not included in the price of this machine. Tangential cutting plotter. 15 inch. Real work horse. Drum Roller just replace. I have tested this Plotter and operates as it should. This Plotter can be used in your business or as a backup. Comes with serial cable. Power cord and pen holder.Any questions. Please ask before bidding. It's in great shape and has served me well for about 10 years. The plotter really shines when you have big jobs- I have run many 50 yd roles through it. Leaving it to cut through the night. I have all the paperwork and manuals. It's a fantastic deal, saving you thousands of dollars and giving you a moneymaker in return. Comes with one wall vinyl rack and a Dell tower. But it can also handle the toughest and thickest materials and laminates. This digital die cutter integrates with the Gerber Edge FX printer to cut inside and and outside shapes on your. more label. Decal, or overlay. Should work, but i can not guarantee it because i don't know about it or how to check it.

    Have not checked to see if it is working properly, has some electric and computer cord repair(see pics) but was working when put away. And has signs of wear and use with some buttons on keyboard cracked(see pics) Includes Auto Kerning, multi-line, rotate, arcing, auto number, X Y moves plus more. It has many font cards, see pics for details: Helvetica Med. Helvetica Bold, Clarendon, Times Bold, Dom Casual, Charter Oak,Commercial.Other extra parts and font modules included, see pics for details. Machines similar to this sell for parts for upwards of 200.00 with out all the Font Modules and Clip Art Module, and all extra parts. This machine is rare due to the fact of it's good condition, functioning correctly and it being the world's FIRST(1983) low-cost, easy-to-use, automated vinyl lettering system.It is in good overall used condition. The lid has a crack in it(see pictures) The control panel cover is loose. Not sure if it is missing screws. But you can lift it slightly(see pictures) so we wanted to note that. See pictures for details of item and condition. Click on them for a larger view. FUNCTIONALITY: Ready for initialization. We will guarantee it to work upon arrival. AUCTION INCLUDES: Gerber enVision 375 printer only as pictured. NO blade. Media, software key or accessories. Auction items include only what is in the eBay picture(s) unless otherwise specified. more above. Including manuals, cables, cords, SD cards, power supplies, etc. MODEL: ENVISION SN: E15-110001 RETURN POLICY We guarantee that this item will be in the condition stated above upon receipt. We offer a 7 day return policy in the event the item is not received as described. Otherwise the return will be rejected and refund will not be given. Return shipping is the responsibility of the buyer. Items returned, but are as described in original listing will be subject to a 20% restocking fee and original shipping will not be refunded.

    Pictures shown are of the actual item(s) you are bidding on. This auction includes only what you see pictured. Payments: Payments must be received within 3 days or we will file a non paying bidder report and the item will be relisted. Please note. If you enter the wrong billing address your card will be declined. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. We Ship to the Continental. These will cost more. We no longer ship to Hawaii. We Ship to confirmed Paypal and Billing addresses Only. Local Pickups: We offer local pickups but please contact us for details. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow. We do not offer Buyitnows. Will you ship to this country or this country. We ship to the US only. What is the history of the item. Most of our items are used and we do not know the history. We test them and picture their current condition. What's Included? 99% of the time If it's pictured it's included.For use with Vinyl cutters.Perfect for motocross graphics, of other niche businesses. Gerber GSP Graphix 2 GX-2 Font Machine 2” Vinyl Letter Printer Plotter SKU: JV-JIM-B-GSPGRAPH2 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc.If in doubt, please contact us before purchasing. Click an Image to Enlarge Gerber Scientific GSP Graphix 2 GX-2 Font Machine 2” Vinyl Letter Cutter Includes Helvetica Medium Font Module(PD18354) Model: GX-2 Physical Condition: Some scuffs and scratches. Able to enter text and start a cutting cycle. Able to adjust blade in full range of motion. Vinyl sheet wheel progresses and reverses. We do not have the necessary resources to further test this unit.

    If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc.If you require more information and specifications. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. If we don't have enough units listed, we may be able to ac Head unit moves in and out. Rollers roll right and left.I do not have the knowlege or supplies to do so.Physically in Great shape- not really much signs of use. I find them mostly at Swap Meets, Estate Sales and second Hand stores. I try to describe them to the best of my abilities. Some obscure items I may not have much knowledge about. Please note that it is a USED item and may have other issues that are not described. Please ask questions before bidding if you have concerns. I guarantee. more most of my items, but you will have to pay the return shipping if the item is returned. All international items will be valued at the bid price. Please do not ask to have the value be stated lower. Thank you for being interested in out items. Pickups are welcome on all items won locally. All California sales will incur 8% sales tax. Was in working condition when retired 6 years ago, I recently powered it up and it looked good. This is a complete system with everything you need to run a CAD business. Although some of the PCs are older. They are all pre-configured and ready to run out of the box. This is as close to a plug-n-play installation as you can get. Accumark Software v7.6(includes 2 ACM Marker Keys and 1 ACM PDS Key) Gerber Nester Software(includes Key and attached Compaq Desktop) Note: Requires.Specifications(PC) OS: Windows 98.

    Gerber Booster Pak and Optiplan Software(includes Optiplan Key) It has been used that way for over a year. We will include 25 foils for the purchase price. We are located in West Chester. PA. Buyer is responsible for shipping costs. Print, Cut solution. The enVision 375 is our most popular cutter not just because it is amazingly fast. This digital die cutter integrates with the Gerber Edge FX printer to cut inside and outside.Decal or overlay. We highly recommend this cutter if you are going to use laminates or transfer adhesives in your label construction. Their high performance servo-drives and continuous automatic systems assure a precision cut at every position. Superior sprocket-feed technology This ensures positive material tracking for outstanding results— no slipping. No skewing, no waste and no guesswork. Reliable Operations enVisions perform so reliably all by themselves. You can become a multi-tasker instead of babysitting the plotter. Micrometer knife holders. That means you can dial out exactly 4 mils of knife blade to cut 3 mil vinyl with 1 mil of adhesive. Using this tool properly will insure proper cutting depth. When the cutting depth is set on the knife holder as described above. The only variable is the cutting force, which can be incre Gerber GS-15 Plus Digital Demand Die Cutter Plotter. Item Description. Manufacturer Gerber, Model Number GS-15, Category Industrial Die Cutter, Cosmetic Wear Item has spot of light marker writing. Some surface scratching. Functional Condition We powered the item on. Then tested its ability to respond to controls. The item responded properly, including knife functions, but cutting head seemed to slip a little when traveling from right to left. Arrow keys will need to be pushed in increments to move left. Items Included In Listing Item as pictured with power cord only. Not Included Manual. Software, additional accessories not pictured. Shipping charges seem too high.Country, and postal code.

    Sorry, we do not use customer shipping accounts. Please note we only offer shipment via UPS unless otherwise specified. Want to pick up an item to save on shipping. Please let us know that you wish to pick up the item locally. Our hours for pick up are M-F 10-4pm. Please note Virginia sales tax of 5.3% will be charged for all items locally picked up. We have recently moved our new address is: C2 Management 351 Station Rd. Berryville, VA 22611. 540-955-5740. Buying more items from us. We offer a discount for additional purchases that can be shipped together. After the first won item please notify us that you are still bidding.do not pay until you are finished bidding so that we can get you a combined shipping total. Please request combined shipping total. We allow up to 7 days for items to be added to an existing order. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By Save time preparing for and outputting to various devices, and helps users optimize their production with tools to automatically leverage features that already exist. You get more original design details and less reassignment of design elements or re-creation of file parts. AI PDF EPS PS TIF JPEG BMP TTF Windows Clipboard And more. GERBER EDGE 2 FEATURES: The GERBE There are signs of use and storage. Such as dust and light marks in the body. Tested: The item turns on and the fan works. The plotter was in working condition when last operated roughly 6 months ago. It may need some adjustment and light cleaning to be put back into full working condition. The instructions are not included. Free instructions are presently available for viewing and download at various internet sites.See detailed pictures for additional included parts. Description The GS15 plus is a state of the art 15-inch(38.1 cm) plotter designed for use with the GRAPHIX ADVANTAGE system and other sign design systems.

    Note: When used with GRAPHIX ADVANTAGE systems. The GS15 plus requires GRAPHIX ADVANTAGE 4.3 or higher. When GS15 plus is used with other sign design systems. Contact the system manufacturer to obtain a driver for the GS15 plus. Which offers the operator a choice of two cutting modes selectable from the plotter keypad: Tangential Knife Mode keeps the blade aligned with the direction of plotting motion for cutting thick materials such as sandblast stencil and for pouncing patterns. Swivel Knife Mode is used for rapid cutting of all but the most demanding materials such as sandblast stencil. Easy-to-weed corners in swivel knife mode. Performance: The GS15 plus is designed to precisely register graphics up to 50 yards(45.7 meters) long using carbide blades for crisp. Sharp cuts. When used with the GRAPHIX ADVAN The Edge Prints a 11.75 Area There is a Bad pixel On the High side at About 11.25 Does not Effect the print if kept below that. Small Sign when you panel the print. Has been a great money maker for us. We have bought a new printer so we no longer need the Edge. The Roland Plotter Works Great as well We will ship to the low 48 There would be 5 Boxes could get pricey. Will only charge the UPS Fees we get charged. Or Loacle pickup I would be willing to Travle 100 Mile to meet somone. Im thinking it could get as high as 300.00 to ship. Scroll down for full-size photos. Item Description Gerber Knife Holder. Cutter head needs new blade. How will my item be shipped. I always ship via the US Postal Service. US Domestic packages will be shipped by either 1st Class Mail(under 13 oz) Priority Mail(over 13 oz) or sometimes by Parcel Post for larger packages. All domestic(US) shipments include free delivery confirmation. You will receive a delivery confirmation number by e-mail when your item ships. International packages will be shipped by USPS First Class International or Priority International. Non-US bidders should e-mail for a shipping quote prior to bidding..


    votre commentaire
  • gerber gsx plus manual

    Download Link: ➡ gerber gsx plus manual



    File Name: gerber gsx plus manual.pdf
    Size: 2248 KB
    Type: PDF, ePub, eBook
    Category: Book
    Uploaded: 30 May 2019, 21:36 PM
    Rating: 4.6/5 from 824 votes.


    Last checked: 11 Minutes ago!









    ⬆ LINK ⬆




















    In order to read or download gerber gsx plus manual ebook, you need to create a FREE account.

    eBook includes PDF, ePub and Kindle version



    ✔ Register a free 1 month Trial Account.
    ✔ Download as many books as you like (Personal use)
    ✔ Cancel the membership at any time if not satisfied.
    ✔ Join Over 80000 Happy Readers


    Book Descriptions:

    gerber gsx plus manual

    Gerber’s software packages and most other industry sign design software Precision cutting at And unlike some troublesome friction plotters, GSx Plus is also Edge Ready. It is able to contour cut the digitally The simple to use keypad requires minimum training. However it is slower at 4.7 In comparison, the Enables ultra long unattended runs Be the first to leave a comment. GS plotters are simple to learn and operate, and define the term “unattended operation.” Includes accessory kit, knife tool holder and blade, pen and material roll holder. Enable ultra-long unattended runs. It may not display this or other websites correctly. You should upgrade or use an alternative browser. By continuing to use this site, you are agreeing to our use of cookies. Learn More. Sorry for my english, im learning.Click to expand. Why don't you get the person that sold it to you help get it set-up.Why don't you get the person that sold it to you help get it set-up. Click to expand. Connection should not be an issue. Its a long story.it came.from a sign company the first owner who bought the machine sold the company to my friend.and my friend never used it.he upgraded to other machine and sitted away this machine in a corner for years until i came and buy it last week.Hope you didn't pay no more then 50 euros even that's to much.Hope you didn't pay no more then 50 euros even that's to much. Click to expand. Do not plug in the key until prompted. 2. The first cable connects to the printer, then the computer. 3. the second cable you are holding connects to the plotter.- the other end goes to the COM1 port on the computer. 4. you will have to learn the software ( see help section in the software. 5. run a print test on the machine - with vinyl and foil loaded - press setup again and again, until you get to TEST PRINT- then select Block or number 5 6.

    • gerber gsx plus manual, gerber gs15 plus plotter manual, gerber gsx plus manual, gerber gsx plus manual transmission, gerber gsx plus manual parts, gerber gsx plus manual pdf, gerber gsx plus manual troubleshooting, gerber gsx plus manual treadmill, gerber gsx plus manual review, gerber gsx plus manual hp, gerber gsx plus manual instructions.

    Please upgrade your browser to improve your experience. Please enable JavaScript to improve your browsing experience. Resources. We would like to inform our customers that we are still operating. See details. It uses a computer corrected, trailing knife so it cuts smooth curves and sharp corners at a good speed. Print-to-Cut alignment by use of the Bombsite means that jobs printed on the Edge can be cut accurately. And unlike some troublesome friction plotters, your material will stay on track no matter how long or complex the job. Get up to two slits free Get up to two slits free Get up to two slits free Get up to two slits free Get up to two slits free No, I want to stay. Please call our team for help on 0800 77 26 33. You will be logged out and redirected to the login page. Click OK to continue and log in again. Why? This greatly reduces the chances that someone else will access your information if you forget to log out. PDF file in one language, only English, Length: 81 pages, Size: 309.6 Kb. The manual were called as Owner's Manual. All specific links are customized just for you. For the best experience on our site, be sure to turn on Javascript in your browser. Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.The GSx is a tractor fed cutter designed to register and cut labels and graphics up to 50 yards (45.7 meters) long using sharp carbide blades for crisp cuts. Enables long unattended runs. Actual item is shown. Only what is shown is RS232 Interface. Includes Knife - Gerber GSx Plus plotter integrates with the Gerber Edge printers and And based on your needs, we can help you decide which is the best cutter for you. Gerber plotter with a capital “G.” It uses a computer corrected, And unlike some troublesome friction plotters, GSx is an open architecture plotter that interfaces with either.

    Click to expand. That is not right. You should be able to design and save jobs any time, as long as the dongle is installed. Click to expand. Recommended Reading. No claim is made that any information is accurate. As such, each reader should not rely on any information available here as accurate and should independently verify such accuracy. In addition, no claim is made that posts made here will be free from profanity, obscenity, rude, hurtful, libelous or insulting opinions of the poster. Such posts should, however, be reported to an Administrator for review.Your use of this website is your acceptance of these terms and conditions of use. The coating speed of the. UV80-RTR is from 10 feet per minute to 33 feet per minute. (3 meters perA motorized loading system pulls Screen controls govern and monitor the process for ease of operation. View Complete Details Available in Coating thickness can be adjusted from 3 to 10 microns. The built in View Complete Details Water-based. The liquid metering roller and bottom roller The machines also feature an V-Grooves as decorative features and finishes in matboard up to 4-ply. View Complete Details Plants. Hand-held versions feature solid brass and plastic contour handles. View Complete Details View Complete Details Its advanced GerberCAT cationic inks and patent-pending Cold Fire Cure technology make it compatible with an unmatched wide range of rolled and rigid materials. View Complete Details Edge fxs exceptional color and material range provides unsurpassed versatility, accommodating a wide range of applications in a single, affordable printing and contour cutting system. The gerbercolor fx foil line features spot, process, transparent, medal, l. T. Heat transfer, finishing, and special effects series, enabling unique effects and a wide gamut for color matching.

    Press the hidden print key - between the setup and slew key, - Press reset after 5 seconds of printing- Note: you do not have to have the printer connected to the computer for this.Do not plug in the key until prompted. 2. The first cable connects to the printer, then the computer. 3. the second cable you are holding connects to the plotter.- the other end goes to the COM1 port on the computer. 4. you will have to learn the software ( see help section in the software. 5. run a print test on the machine - with vinyl and foil loaded - press setup again and again, until you get to TEST PRINT- then select Block or number 5 6. Press the hidden print key - between the setup and slew key, - Press reset after 5 seconds of printing- Note: you do not have to have the printer connected to the computer for this. Click to expand. Device error how are the dongles supossed to be connected.Looks like you are on the right track. The Edge model you have is an LE- its old but pretty reliable. Also clean the silver rails on the plotter, and put some light oil on them - such as 3 in 1.Looks like you are on the right track. Also clean the silver rails on the plotter, and put some light oil on them - such as 3 in 1. Click to expand. They are fairly simple to replace. Be sure to clean the printhead with only wipes made for cleaning electronic printheads, they are used on barcode readers and other devices so readily available. Always clean the head by gently wiping after use. And wipe the rails with machine oil as Jburns suggested. Also wipe the cutter head where it sits in the holder. There may also be a point to oil the head. Good luck.That is not right. You should be able to design and save jobs any time, as long as the dongle is installed.As for the shocks- I use one of these to mount new ones - it compresses the shock so you can mount it. No- I can operate composer with the machines off.They are fairly simple to replace. There may also be a point to oil the head. Good luck.

    In addition to saving post-printing labor time, you'll dramatically reduce the time it takes to produce various products.Monochrome printing is also possible using a variety of spot colors. Full color or spot color ---- the choice is yours; and the setup is easy.You can produce instant signage on a variety of different substrates.The result is the worlds most advanced 64-inch wide photographic printer.View Complete Details From routing inkjet-printed corrugated plastic, to kiss-cutting vinyl decals, to contour cutting and creasing of digital offset POP graphics, the Gerber M Series can handle all your finishing needs accurately and 100% digitally, expanding your capabilities while maximizing the productivity and efficiency of your operations. View Complete Details Get Best Deal I agree to the terms and privacy policy All rights reserved. Corrugated Packaging Corrugated Plastic Design Department Contour Spectrum Vinyl Decals Digital Prints Kiss Printing The Gerber M Series flatbed cutter is a powerful and versatile solution for automatic print-to-cut finishing of a wide spectrum of graphic applications. From routing printed corrugated plastic, to kiss-cutting vinyl decals, to contour cutting and creasing. Choosing a Gerber Envision plotter could be the fastest decision you’ll ever make. Print Finishes Effort Manual Digital Prints Vacuums How To Remove Printing Home Appliances Sign IP Eyelet Press EP-200 This eyelet press allows for the fast, easy and safe installation of eyelets, removing the effort required during manual installation. Print Finishes Welding Machine High Speed Digital Prints Banner Printing Spandex Design Fingerprints Banner welding machine The Spandex banner welder is designed for perfect seam and overlap welding at high speeds. Parts Gerber Edge Printer. Gerber Plotter,Flexisign Window tint, etc. The Plotter Doctor has been selling and repairing Gerber products since 1985. We have other parts available as well. Shipping: we ship world-wide.

    The full selection of edge ready materials includes cast and calendered vinyls in addition to a breadth of specialty materials such as magnetic, reflective, metallic colors, heat transfer, label stock, and much more. The edge fx is ideal for any business that creates visual signage including screen printers, sign companies, exhibit houses, trophy shops, fleet graphics artists, museums, and ad specialty sellers. And with applications as diverse as their businessesedge fx is perfect for: View Complete Details Built and backed by gerber, the gerber maxx 2 incorporates scores of manufacturing enhancements and other improvements. And the gerber maxx 2 comes standard with one-year on-site service and unlimited phone support, so you can use the gerber maxx 2 with confidence. View Complete Details The envision 375 runs on gerber omega software, as well as most popular design software platforms supporting hp-gl. The envision plotters offer ultra-precise tracking and automatic material alignment and are the fastest sprocket-feed plotters currently on the market. View Complete Details The envision 750 runs on gerber omega software, as well as most popular design software platforms supporting hp-gl. View Complete Details This is a recommended plotter for shops that cut mostly sandblast stencil. Includes an accessory kit, tangential knife tool holder and blade, swivel knife tool holder and blade, pen, pounce wheel, and material roll holder. View Complete Details Simple to operate, virtually all the capabilities of a large-bed router yet sits on a tabletop. View Complete Details Also suitable for converters. View Complete Details View Complete Details Considered the first 'one step sign-making machine', the 12-24 transfers images directly onto your substrate. This one step process eliminates the need to manually transfer your work, thus saving you time and money. 12-24 color first technology promises to bring new efficiencies to your business.

    SHIPPING INFO Our goal is to ship your item within 1-2 business days after payment has cleared. Freight items may take 2-3 business days. For your and our safety, we only ship to the confirmed Paypal address(AKA billing address) if you choose that option. Need it shipped elsewhere. Pay via cashiers check.However in the event that an item is damaged during transit, buyer must notate that with the driver before signing for the package. Keep the box and all packaging mater Manufacturer: Gerber Model: 750 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Gerber Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: This item was not fully tested. Since we do not have the proper resources. The cover has a crack in it and the left corner of the case has a piece broken off, as seen in the pictures. When powered on the plotter went through its self-test, aligned the cutting head and then displayed the main menu. We were able to toggle through several of the function pages, as seen in the pictures. We got the roller to.No further testing was performed. This item does not come equipped with any cutting assemblies, vinyl roll bars, cutting assembly cover or software. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms One of the best cutter plotter on the market, cuts fast and accurate. Cutter operates without any issues. Was not heavily used, Rubber on friction wheels is in great condition. Automatically aligns media so that printed graphics can be accurately contour cut. Includes: manual. powercord. software not included. Please ask any questions prior to bidding. Sell to the lower 48 states of the continental US only. No international please.

    Gerber ODYSSEY 52 Vinyl Cutter Plotter The Gerber ODYSSEY with GerberDrive is a breakthrough. First-of-its-kind plotter which combines the ultra-precise tracking of a sprocket-feed plotter with media-width flexibility.. more Providing extreme accuracy in material tracking and alignment demanded by sign shops for long signs and unattended operation. This 48” engineering marvel offers the best of all worlds.Gerber enVision plotter with eye piece in excellent condition. Gerber Edge 2 printer in excellent condition. Software included on a Dell PC. Keyboard, mouse, HP flat screen monitor. Local pick up and serious offers only. This is a package deal and I prefer not to split them up. Feel free to ask any questions and I will be glad to coordinate a time to demonstrate the machines for you. Posted with Just send me a message. OEM USB Dongle Note: The Omega 1.56 CD has some minor scratches but installs properly. There is a second copy of the disk with this package. I am selling this fully tested set simply because I have an extra set of Omega which I currently use. Note that you will need to sign for this upon delivery. Both are in excellent condition, and work with no issues. The plotter has a new drum recently installed from plotterdoctor which has a 5 year warranty, Will include 35 different foils for the printer, Most are new, and the roll holder for the printer. Also included is the serial cable for the plotter( this one is hard to find) Let me know if you have any questions. Shipping is free through fedex ground with full insurance. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items. Cutter operates without any issues and is in great condition. Purchased less than one month ago from original owner who used it very lightly. Decided to go with a smaller model. Power cord and parallel to usb included. Software is not included. Will ship for free to US 48 states Posted with Please see pictures.

    Price is calculated based on your location. The Plotter Doctor 562-633-4132 We have other parts available as well. The Plotter Doctor 562-633-4132 Roland Graphtec Mimaki SignPal Ioline Pcut Durability, super strength abrasive carbide cutting tools. Product Description Premium class plotter blade.. more Product line covers wide selection vinyl cutting plotter. Made from costly. Ultra strength, extremely wear-resistance, shock resistance quality cemented carbide material. Heavy duty material. Enjoy Top Quality Plotter Blade- photo for reference only.These belts are brand new. Not used, and we warranty them for 1 year. The Plotter Doctor has been selling.We have other parts available as well. http:www.theplotterdoctor.com Shipping: we ship world-wide. Warranty: 1 year Jim 562-633-4132 Powered by The free listing tool. List your items fast and easy and manage your active items. Single or low-ply static cutter, designed to cut a wide variety of materials.Shipping charges are not included in the price of this machine. Tangential cutting plotter. 15 inch. Real work horse. Drum Roller just replace. I have tested this Plotter and operates as it should. This Plotter can be used in your business or as a backup. Comes with serial cable. Power cord and pen holder.Any questions. Please ask before bidding. It's in great shape and has served me well for about 10 years. The plotter really shines when you have big jobs- I have run many 50 yd roles through it. Leaving it to cut through the night. I have all the paperwork and manuals. It's a fantastic deal, saving you thousands of dollars and giving you a moneymaker in return. Comes with one wall vinyl rack and a Dell tower. But it can also handle the toughest and thickest materials and laminates. This digital die cutter integrates with the Gerber Edge FX printer to cut inside and and outside shapes on your. more label. Decal, or overlay. Should work, but i can not guarantee it because i don't know about it or how to check it.

    Have not checked to see if it is working properly, has some electric and computer cord repair(see pics) but was working when put away. And has signs of wear and use with some buttons on keyboard cracked(see pics) Includes Auto Kerning, multi-line, rotate, arcing, auto number, X Y moves plus more. It has many font cards, see pics for details: Helvetica Med. Helvetica Bold, Clarendon, Times Bold, Dom Casual, Charter Oak,Commercial.Other extra parts and font modules included, see pics for details. Machines similar to this sell for parts for upwards of 200.00 with out all the Font Modules and Clip Art Module, and all extra parts. This machine is rare due to the fact of it's good condition, functioning correctly and it being the world's FIRST(1983) low-cost, easy-to-use, automated vinyl lettering system.It is in good overall used condition. The lid has a crack in it(see pictures) The control panel cover is loose. Not sure if it is missing screws. But you can lift it slightly(see pictures) so we wanted to note that. See pictures for details of item and condition. Click on them for a larger view. FUNCTIONALITY: Ready for initialization. We will guarantee it to work upon arrival. AUCTION INCLUDES: Gerber enVision 375 printer only as pictured. NO blade. Media, software key or accessories. Auction items include only what is in the eBay picture(s) unless otherwise specified. more above. Including manuals, cables, cords, SD cards, power supplies, etc. MODEL: ENVISION SN: E15-110001 RETURN POLICY We guarantee that this item will be in the condition stated above upon receipt. We offer a 7 day return policy in the event the item is not received as described. Otherwise the return will be rejected and refund will not be given. Return shipping is the responsibility of the buyer. Items returned, but are as described in original listing will be subject to a 20% restocking fee and original shipping will not be refunded.

    Pictures shown are of the actual item(s) you are bidding on. This auction includes only what you see pictured. Payments: Payments must be received within 3 days or we will file a non paying bidder report and the item will be relisted. Please note. If you enter the wrong billing address your card will be declined. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. We Ship to the Continental. These will cost more. We no longer ship to Hawaii. We Ship to confirmed Paypal and Billing addresses Only. Local Pickups: We offer local pickups but please contact us for details. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow. We do not offer Buyitnows. Will you ship to this country or this country. We ship to the US only. What is the history of the item. Most of our items are used and we do not know the history. We test them and picture their current condition. What's Included? 99% of the time If it's pictured it's included.For use with Vinyl cutters.Perfect for motocross graphics, of other niche businesses. Gerber GSP Graphix 2 GX-2 Font Machine 2” Vinyl Letter Printer Plotter SKU: JV-JIM-B-GSPGRAPH2 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc.If in doubt, please contact us before purchasing. Click an Image to Enlarge Gerber Scientific GSP Graphix 2 GX-2 Font Machine 2” Vinyl Letter Cutter Includes Helvetica Medium Font Module(PD18354) Model: GX-2 Physical Condition: Some scuffs and scratches. Able to enter text and start a cutting cycle. Able to adjust blade in full range of motion. Vinyl sheet wheel progresses and reverses. We do not have the necessary resources to further test this unit.

    If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc.If you require more information and specifications. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. If we don't have enough units listed, we may be able to ac Head unit moves in and out. Rollers roll right and left.I do not have the knowlege or supplies to do so.Physically in Great shape- not really much signs of use. I find them mostly at Swap Meets, Estate Sales and second Hand stores. I try to describe them to the best of my abilities. Some obscure items I may not have much knowledge about. Please note that it is a USED item and may have other issues that are not described. Please ask questions before bidding if you have concerns. I guarantee. more most of my items, but you will have to pay the return shipping if the item is returned. All international items will be valued at the bid price. Please do not ask to have the value be stated lower. Thank you for being interested in out items. Pickups are welcome on all items won locally. All California sales will incur 8% sales tax. Was in working condition when retired 6 years ago, I recently powered it up and it looked good. This is a complete system with everything you need to run a CAD business. Although some of the PCs are older. They are all pre-configured and ready to run out of the box. This is as close to a plug-n-play installation as you can get. Accumark Software v7.6(includes 2 ACM Marker Keys and 1 ACM PDS Key) Gerber Nester Software(includes Key and attached Compaq Desktop) Note: Requires.Specifications(PC) OS: Windows 98.

    Gerber Booster Pak and Optiplan Software(includes Optiplan Key) It has been used that way for over a year. We will include 25 foils for the purchase price. We are located in West Chester. PA. Buyer is responsible for shipping costs. Print, Cut solution. The enVision 375 is our most popular cutter not just because it is amazingly fast. This digital die cutter integrates with the Gerber Edge FX printer to cut inside and outside.Decal or overlay. We highly recommend this cutter if you are going to use laminates or transfer adhesives in your label construction. Their high performance servo-drives and continuous automatic systems assure a precision cut at every position. Superior sprocket-feed technology This ensures positive material tracking for outstanding results— no slipping. No skewing, no waste and no guesswork. Reliable Operations enVisions perform so reliably all by themselves. You can become a multi-tasker instead of babysitting the plotter. Micrometer knife holders. That means you can dial out exactly 4 mils of knife blade to cut 3 mil vinyl with 1 mil of adhesive. Using this tool properly will insure proper cutting depth. When the cutting depth is set on the knife holder as described above. The only variable is the cutting force, which can be incre Gerber GS-15 Plus Digital Demand Die Cutter Plotter. Item Description. Manufacturer Gerber, Model Number GS-15, Category Industrial Die Cutter, Cosmetic Wear Item has spot of light marker writing. Some surface scratching. Functional Condition We powered the item on. Then tested its ability to respond to controls. The item responded properly, including knife functions, but cutting head seemed to slip a little when traveling from right to left. Arrow keys will need to be pushed in increments to move left. Items Included In Listing Item as pictured with power cord only. Not Included Manual. Software, additional accessories not pictured. Shipping charges seem too high.Country, and postal code.

    Sorry, we do not use customer shipping accounts. Please note we only offer shipment via UPS unless otherwise specified. Want to pick up an item to save on shipping. Please let us know that you wish to pick up the item locally. Our hours for pick up are M-F 10-4pm. Please note Virginia sales tax of 5.3% will be charged for all items locally picked up. We have recently moved our new address is: C2 Management 351 Station Rd. Berryville, VA 22611. 540-955-5740. Buying more items from us. We offer a discount for additional purchases that can be shipped together. After the first won item please notify us that you are still bidding.do not pay until you are finished bidding so that we can get you a combined shipping total. Please request combined shipping total. We allow up to 7 days for items to be added to an existing order. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By Save time preparing for and outputting to various devices, and helps users optimize their production with tools to automatically leverage features that already exist. You get more original design details and less reassignment of design elements or re-creation of file parts. AI PDF EPS PS TIF JPEG BMP TTF Windows Clipboard And more. GERBER EDGE 2 FEATURES: The GERBE There are signs of use and storage. Such as dust and light marks in the body. Tested: The item turns on and the fan works. The plotter was in working condition when last operated roughly 6 months ago. It may need some adjustment and light cleaning to be put back into full working condition. The instructions are not included. Free instructions are presently available for viewing and download at various internet sites.See detailed pictures for additional included parts. Description The GS15 plus is a state of the art 15-inch(38.1 cm) plotter designed for use with the GRAPHIX ADVANTAGE system and other sign design systems.

    Note: When used with GRAPHIX ADVANTAGE systems. The GS15 plus requires GRAPHIX ADVANTAGE 4.3 or higher. When GS15 plus is used with other sign design systems. Contact the system manufacturer to obtain a driver for the GS15 plus. Which offers the operator a choice of two cutting modes selectable from the plotter keypad: Tangential Knife Mode keeps the blade aligned with the direction of plotting motion for cutting thick materials such as sandblast stencil and for pouncing patterns. Swivel Knife Mode is used for rapid cutting of all but the most demanding materials such as sandblast stencil. Easy-to-weed corners in swivel knife mode. Performance: The GS15 plus is designed to precisely register graphics up to 50 yards(45.7 meters) long using carbide blades for crisp. Sharp cuts. When used with the GRAPHIX ADVAN The Edge Prints a 11.75 Area There is a Bad pixel On the High side at About 11.25 Does not Effect the print if kept below that. Small Sign when you panel the print. Has been a great money maker for us. We have bought a new printer so we no longer need the Edge. The Roland Plotter Works Great as well We will ship to the low 48 There would be 5 Boxes could get pricey. Will only charge the UPS Fees we get charged. Or Loacle pickup I would be willing to Travle 100 Mile to meet somone. Im thinking it could get as high as 300.00 to ship. Scroll down for full-size photos. Item Description Gerber Knife Holder. Cutter head needs new blade. How will my item be shipped. I always ship via the US Postal Service. US Domestic packages will be shipped by either 1st Class Mail(under 13 oz) Priority Mail(over 13 oz) or sometimes by Parcel Post for larger packages. All domestic(US) shipments include free delivery confirmation. You will receive a delivery confirmation number by e-mail when your item ships. International packages will be shipped by USPS First Class International or Priority International. Non-US bidders should e-mail for a shipping quote prior to bidding..


    votre commentaire
  • gerber gtxl manual

    Download Link: ➡ gerber gtxl manual



    File Name: gerber gtxl manual.pdf
    Size: 3836 KB
    Type: PDF, ePub, eBook
    Category: Book
    Uploaded: 16 May 2019, 17:39 PM
    Rating: 4.6/5 from 814 votes.


    Last checked: 2 Minutes ago!









    ⬆ LINK ⬆




















    In order to read or download gerber gtxl manual ebook, you need to create a FREE account.

    eBook includes PDF, ePub and Kindle version



    ✔ Register a free 1 month Trial Account.
    ✔ Download as many books as you like (Personal use)
    ✔ Cancel the membership at any time if not satisfied.
    ✔ Join Over 80000 Happy Readers


    Book Descriptions:

    gerber gtxl manual

    Sharjah, United Arab Emirates Click to Request Price Gerber ContourVision Manufacturer: Gerber Scan and cut custom printed textiles or mats with borders.With ContourVision automated scan-to-cut system, manufacturers can scan custom printed textiles, automatically generate cut files and cut directly from te. Output pattern pieces for verification and print small markers for visualization purposes. It isThis is a. Grant GD100 Scientific Gerber Bath For Fat TestingOverall Dimensions (L x W x H):CaracteristiquesBoasting innovative engineering enhancements, the I-Table helps to optimize your fabric-cutting processes, with longer-lasting performance and increa. Sharjah, United Arab Emirates Click to Request Price Gerber Digitizer Pattern Digitizing System Manufacturer: Gerber Easily digitize your existing paper patterns for use in a CAD system. It compensates for fabric irregularities and de. Sharjah, United Arab Emirates Click to Request Price Gerber Silhouette Drafting Table - Industrial Manufacturer: Gerber An interactive pattern design system that bridges the gap between manual pattern making and computer automation. Images drawn or traced on. Sharjah, United Arab Emirates Click to Request Price Gerber Taurus II Leather Cutter Manufacturer: Gerber Automated leather cutting system maximizes hide yield and throughput to give you the fastest return on your investment.The Taurus II static leather cutting system captures the hide shape and up to four flaw grade. Sharjah, United Arab Emirates Click to Request Price Gerber Cutter DCS 2600 with Pivex Technology Manufacturer: Gerber Patented technology enables fast and extremely accurate cutting of even the most challenging materials. Sharjah, United Arab Emirates Click to Request Price Gerber Cutter DCS 1600 with Pivex Technology Manufacturer: Gerber The ideal cutting system for samples, prototypes and small production runs. No Yes Please tell us more so that we can improve our website: How can we get in touch with you?

    • gerber gtxl manual, gerber gtxl cutter manual, gerber gtxl manual, gerber gtxl manual, gerber gtxl manual transmission, gerber gtxl manual user, gerber gtxl manual typewriter, gerber gtxl manual instructions, gerber gtxl manual parts, gerber gtxl manual download, gerber gtxl manual model, gerber gtxl manual guide, gerber gtxl manual.

    Discover everything Scribd has to offer, including books and audiobooks from major publishers. Start Free Trial Cancel anytime. Report this Document Download Now Save Save GTxLGetStart For Later 50% (2) 50% found this document useful (2 votes) 936 views 87 pages GTxLGetStart Uploaded by Carlos Enrique Muniz Ortega Description: Full description Save Save GTxLGetStart For Later 50% 50% found this document useful, Mark this document as useful 50% 50% found this document not useful, Mark this document as not useful Embed Share Print Download Now Jump to Page You are on page 1 of 87 Search inside document Browse Books Site Directory Site Language: English Change Language English Change Language. Please upgrade your browser to improve your experience. Please enable JavaScript to improve your browsing experience. GERBERcutters execute cut plans with precision and reliability, allowing you to accelerate delivery of your products to the market. Two models available: the LX Series cuts up to 2.75 cm (1.08 inches) and the HX Series cuts up to 7.2 cm (2.8 inches) of compressed material. Both are available in widths of 1.8 and 2.2 meters. Various table surface materials to suit different cutting applications. Optional Pivex knife and ingress protection available. HJAR is capable to handle various types of blades in various shape and various material. We also are very happy to accept new project trial, once we accept your project, we will see it through. 21261011 CAD Cutting knives for Gerber S91 The products in HUAJIARI is exported to many coutries. You will find the right blades here for cutting film, paper, food and innumerable other cutting applications. They are universally applicable and fit in many manually operated cutting tools and in many machines.Any customized dimension is available. This centrifuge has been developed for milk analysis.

    Prospective bidders are urged to contact HGP directly for detailed information regarding any item for sales. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY are expressly disclaimed. All bidders must provide their name, company (if applicable), mailing address, phone number and email address prior to the auction. By registering, you represent and warrant any and all Buyer Information is accurate and complete. It is solely the Buyers responsibility to maintain current Buyer Information for completeness and accuracy. HGP reserves the right to deny and or terminate Registrations at any time at its sole discretion without notification. HGP reserves the right to deny usage and access of HGP Services and Websites at any time without notice or liability to any persons or third parties. When applicable, Electronic Bidders are required to provide a valid Visa or MasterCard number. At its discretion, HGP may charge a registration fee for Electronic bidding. This fee will be clearly displayed during the registration process. THE BIDDER AUTHORIZES HGP TO CHARGE LIQUIDATED DAMAGES TO THE CREDIT CARD LEFT ON FILE DURING THE REGISTRATION PROCESS. (See section 9 “Default” below.) 2A. HGP and its Website are for use by persons acting within their trade or businesses and may not be used by consumers. By registering, the Buyer represents, warrants and undertakes that it is or acts for a business and not for consumer transactions and has given correct information about its business and contact details as requested in HGP’s registration procedure. This can be in the form of cash, a cashier’s check, or business check with a bank letter of guarantee. For Electronic Bidders, at its discretion, HGP may contact bidders via email or telephone before or during the sale to obtain a bank letter of guarantee or wire transfer as a deposit.

    (optional) Send Feedback Thank you for making Machinio better. Your feedback is greatly appreciated. By using our services, you agree to our use of cookies. Gerber GerberCutter GTxL CNC Cutting Machine, Low-ply Conveyorized System For the best chance of winning, increase your maximum bid.Please check your email account for more details.You can contact the auctioneer on 650-646-2505 for more information.We have thousands of new lots everyday, start a new search.Please register now so you are approved to bid when auction starts.All bidders must complete the registration form provided including name, company (if applicable), mailing address, and phone number. Bidders are also required to provide a valid email address. Credit card info is required at the time of registration. Visa, MasterCard, or American Express credit cards will be accepted for registration only.Payment Instructions, including Wire Transfer information, will be included, as well as instructions for removal. The Terms apply to all Transactions, including without limitation, public auctions conducted by HGP and direct purchases by Buyer of any item either before, after or independent of any public auction. By using or accessing any and all HGP Services and or Websites you agree you have read and understand the Terms and Conditions stated herein and are bound to these Terms and Conditions. You may not use or access any and all HGP Services if you do not agree to the Terms and Conditions stated herein. Neither HGP nor the Consignor makes any warranties or representations of any kind or nature with respect to the property or its value and in no event shall either be responsible for correctness of description, genuineness, attribution, provenance, authenticity, authorship, completeness, condition of the property or estimate of its value. No statement (oral or written) in the catalog, at the auction, or elsewhere shall be deemed such a warranty or representation, or any assumption of responsibility.

    Buyers may either pick up Goods at the designated auction site themselves or can contract with a third party agent to manage the removal process for them. Before Goods can be removed by an Agent, Agent must provide HGP with (1) proof of payment in full (Paid in Full Invoice) and (2) An “Agent Release Authorization” form which allows HGP to release items to a third party contractor for shipping, crating or packing purposes. Goods weighing more than 100 pounds must be removed by a qualified, insured rigger. Before any removal, Buyer must provide HGP with a certificate of insurance from the rigger, which certificate must be in form, scope and content acceptable to HGP in HGP’S sole discretion. HGP shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines. Buyer is solely responsible to properly remove and store in appropriate containers all fluids, oils, hazardous chemicals, etc., from machinery purchased. Buyer does hereby indemnify HGP, the Consignor and the owner of the premises in which the Goods are located, from any and all claims, damages, and losses arising from Buyer’s actions or actions with respect to the Goods and Buyer’s presence on the premises in which the Goods are located, including without limitation, injuries to persons or property and environmental violations or contamination. Risk of loss on any Goods shall pass to the Buyer upon payment in full to HGP of all sums due from Buyer in respect to the Goods. HGP shall have no responsibility whatsoever for any missing or lost items that can be removed by hand if such items have not been removed within forty-eight (48) hours of the conclusion of the sale. There will be NO removal of any lots until the auction is complete. All items awarded to high bidders are contractually theirs and must be paid for by the Final Payment Date and removed by the Final Removal Date.

    If HGP does not receive a response from its attempts to contact Buyer or if the Buyer does not provide a deposit, HGP reserves the right to refuse or cancel Buyer’s bids. For Onsite and Webcast auctions, winning bidders can request a printed paper invoice from the Accounting Manager at the sale location during or after the sale. Electronic Bidders will be sent an electronic invoice to the email address provided during registration. Detailed payment instructions for each sale are available in the printed lot catalog at the sale location on the day of the sale. Electronic Bidders will be sent detailed payment instructions via email along with their invoice. All payments must be by federal wire transfer of immediately available funds and all of the foregoing must be in form, scope and substance acceptable to HGP. Credit cards are only accepted for Electronic bidding registration and for Liquidated Damages in the event of a default. No title shall pass to Buyer until the total purchase price and all Taxes have been paid to HGP in collected funds. To receive the benefit of any tax exemption, Buyer must supply HGP with a sales tax exemption certificate acceptable in form, scope and substance to HGP in HGP’S sole discretion. Acceptable forms of payment are wire transfer, cashiers or certified check and company check with a bank letter of guarantee. If the auction is conducted as a webcast sale (simultaneously conducted live on-site and streamed over the Internet for online participation), a different Buyer’s Premium may be applicable and will be announced at the time of that specific sale. ANY ITEMS NOT REMOVED ON OR BEFORE THE REMOVAL DATE SHALL BE DEEMED ABANDONED AND HGP SHALL HAVE NO FURTHER OBLIGATION TO BUYER WITH RESPECT TO SUCH ITEMS. Buyer shall be responsible for the safe and proper removal of any Goods purchased by Buyer. HGP does not pack, ship, store, crate or rig items for removal.

    HGP reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that HGP believes was made illegally or in bad faith. In the event of a dispute among bidders, HGP may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute. No returns or refunds will be permitted, unless authorized by the Consignor in writing. Without limiting the generality of the foregoing, HGP may accept a complete lot bid and then conduct an item by item auction which auction shall be effective only if the total proceeds there from exceed the amount of the complete bid. All information provided by HGP to Buyers, including without limitation, any advertising, lot sales catalogs or otherwise, is subject to deletions, errors, additions, and changes without notice. Although information is gathered from sources thought to be reliable, HGP shall have no responsibility whatsoever for any information provided to any attendee or buyers. All buyers shall rely solely on their own investigation and inspection of any Goods. HGP reserves the right to amend any and all of the Terms and Conditions stated herein at any time without notification at HGP’s sole discretion. It is the Buyers responsibility to read and review the Terms and Conditions for each sale. HGP provides the Terms and Conditions through its Websites and in printed form at on-site auctions. When HGP is selling or auctioning any Goods on behalf of a Consignor, HGP shall act as an agent only and shall have no liability whatsoever for the acts of any owner or principal. Buyers agree to comply with all United States export control and related laws, as well as acknowledge that HGP is not the exporter of any purchased item. Certain items offered for sale at an Auction or Sealed Bid Sale may constitute “Restricted Technology.

    ” Under Federal Law, such items may not be shipped outside the United States. Buyer also agrees not to export any item to countries which are subject to comprehensive embargoes or support terrorism. These countries include, but are not limited to: Cuba, Iran, North Korea, Sudan, and Syria. The list will change from time to time. HGP makes no representation or warranty concerning Restricted Technology or conducted an investigation to ascertain, which items, if any, constitute Restricted Technology. Heavy equipment may be operated and electrical circuits may be live. Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises. No person shall have any claim against HGP, the seller or their respective agents for any injuries sustained or for damages to or loss of property that may occur at the auction site. If the Buyer fails to comply with any of the Terms, HGP shall have all rights and remedies available to it at law and in equity. Without limiting the generality of the foregoing, HGP may retain all deposits and partial payments received from Buyer and may resell any Goods that Buyer fails to purchase. Buyer shall be responsible for all costs, losses, and damages suffered by HGP (i) as a result of Buyer’s breach of any of the Terms, including without limitation, lost profits and consequential damages and (ii) incurred in connection with the enforcement of HGPS’ rights, including, without limitation, legal fees and costs and expenses related to the resale of Goods, including storage and rigging fees. Any and all forms of collusion between Buyers is forbidden. Buyers agree they will not place bids using false names or Buyer Information.

    Failure to pay invoices in full by the Final Payment Date in accordance with payment terms will subject Bidder to pay as Liquidated Damages a sum equal to the lesser of (1) 20 percent of the invoice price of the item(s) as to which the default has occurred, or (2) the full amount of the difference between the original invoice price and the re-sold price plus any expenses incurred to re-market or re-sell these items. IF HGP HAS NOT RECEIVED PAYMENT FOR WINNING BIDS WITHIN 24 HOURS OF THE FINAL PAYMENT DATE, THE BIDDER AUTHORIZES HGP TO CHARGE LIQUIDATED DAMAGES TO THE CREDIT CARD LEFT ON FILE DURING THE REGISTRATION PROCESS. Failure to remove items by the Final Removal Date in accordance with removal terms will subject Bidder to pay as Liquidated Damages the full amount of the expenses incurred to store or transport items until they are re-sold.Buyer must make all requests for adjustments in writing to HGP before any item is removed from the premises where the auction is conducted. Without limiting the foregoing, HGP shall not be responsible for damages or losses caused by strikes, civil disorders, or acts of God. HGP reserves the right to temporarily or permanently end an auction prior to or during the stated auction period at is sole discretion without notification. HGP, in its sole discretion, reserves the right to extend the stated auction period without notification. If for any reason HGP is unable to deliver any Goods purchased by Buyer, HGP’S sole liability shall be to return all sums paid by Buyer to HGP in respect of such Goods. HGP reserves the right to confirm or reject the final bid.Certain lots may be offered for sale “Subject to Seller Confirmation,” meaning the seller has the right to confirm or reject the highest bid tendered at the auction sale within a stated time period following the close of bidding as set forth either in the respective lot description, on the auction landing page or under the Auction Details tab on the catalog page.

    The lot description for any such lot shall clearly designate that the respective lot is being offered for sale Subject to Seller Confirmation. Bidder acknowledges that the high bid received for such lot(s) shall remain irrevocable until the end of the stated confirmation period, and the lot will only be awarded to the high bidder if confirmed by the seller. Regardless of whether the high bidder receives a preliminary post-auction notification that the bidder “may have won” the lot in question, no such lot shall be awarded to the high bidder unless and until such time as the high bidder has received a written or telephonic notification from HGP that the high bid has been confirmed by the seller. By completing an “Absentee (Proxy) Bidder Form,” Bidders may appoint HGP to be an agent and proxy for the sole purpose of purchasing the items listed when the Bidder CANNOT bid on the day of the sale. ALL BIDS ARE FINAL AND BINDING and DO NOT include any applicable buyer’s premiums and sales taxes. HGP will bid up to the specified maximum bid amount to win the item, using only the amount needed to win the item. HGP has complete discretion whether and when to accept Proxy bids. The auctioneer’s announcements at the time the lot is sold take precedence on any and all published materials. Proxy bidders will be notified only if they have been declared the high bid. Notification will take place in the form of an electronic invoice which will be sent to the email address provided during registration. HGP, in its sole discretion, reserves the right to refuse the bid of any person without providing any notice or reason therefore. HGP reserves the right to deny the usage and access by any person or third party of any and all HGP Services and Websites without notification.

    Buyers agree they will defend, indemnify and hold harmless HGP, including its affiliates, directors, officers, employees, agents, shareholders, co-branders, or partners, from and against any and all claim, loss, damage, liabilities, judgments, fees and expenses incurred by HGP, including its affiliates, directors, officers, employees, agents, shareholders, co-branders, or partners, through the use of HGP Services and Websites. B) Registrants are solely responsible for any and all transactions or transmissions using their User Name and Password C) HGP is not responsible for any and all unauthorized or compromised usage of the Registrant’s User Name and Password. Registrants are responsible for contacting HGP in writing for any and all unauthorized usage of their User Name and Password. D) Registrants agree they will not: i) Disrupt, interfere or create outages to computer networks that directly or indirectly affect HGP Websites.Registrants are forbidden from misrepresenting a Registrant’s employment by or affiliation with any third party.E) HGP is not responsible for any and all products, content, information or material provided by links to or statements regarding third party services. This includes but not limited to riggers, shippers, partners and any third party services listed. F) Registrants agree HGP and its affiliates, including partners, officers, directors, employees, agents, shareholders or co-branders, are not responsible for any and all damages, actual or alleged, resulting from the downloading of any information or materials from HGP Websites. All bidders must complete the registration form provided including name, company (if applicable), mailing address, and phone number. Bidders are also required to provide a valid email address. Credit card info is required at the time of registration. Visa, MasterCard, or American Express credit cards will be accepted for registration only.

    Payment Instructions, including Wire Transfer information, will be included, as well as instructions for removal. The Terms apply to all Transactions, including without limitation, public auctions conducted by HGP and direct purchases by Buyer of any item either before, after or independent of any public auction. By using or accessing any and all HGP Services and or Websites you agree you have read and understand the Terms and Conditions stated herein and are bound to these Terms and Conditions. You may not use or access any and all HGP Services if you do not agree to the Terms and Conditions stated herein. Neither HGP nor the Consignor makes any warranties or representations of any kind or nature with respect to the property or its value and in no event shall either be responsible for correctness of description, genuineness, attribution, provenance, authenticity, authorship, completeness, condition of the property or estimate of its value. No statement (oral or written) in the catalog, at the auction, or elsewhere shall be deemed such a warranty or representation, or any assumption of responsibility. Prospective bidders are urged to contact HGP directly for detailed information regarding any item for sales. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY are expressly disclaimed. All bidders must provide their name, company (if applicable), mailing address, phone number and email address prior to the auction. By registering, you represent and warrant any and all Buyer Information is accurate and complete. It is solely the Buyers responsibility to maintain current Buyer Information for completeness and accuracy. HGP reserves the right to deny and or terminate Registrations at any time at its sole discretion without notification. HGP reserves the right to deny usage and access of HGP Services and Websites at any time without notice or liability to any persons or third parties.

    When applicable, Electronic Bidders are required to provide a valid Visa or MasterCard number. At its discretion, HGP may charge a registration fee for Electronic bidding. This fee will be clearly displayed during the registration process. THE BIDDER AUTHORIZES HGP TO CHARGE LIQUIDATED DAMAGES TO THE CREDIT CARD LEFT ON FILE DURING THE REGISTRATION PROCESS. (See section 9 “Default” below.) 2A. HGP and its Website are for use by persons acting within their trade or businesses and may not be used by consumers. By registering, the Buyer represents, warrants and undertakes that it is or acts for a business and not for consumer transactions and has given correct information about its business and contact details as requested in HGP’s registration procedure. This can be in the form of cash, a cashier’s check, or business check with a bank letter of guarantee. For Electronic Bidders, at its discretion, HGP may contact bidders via email or telephone before or during the sale to obtain a bank letter of guarantee or wire transfer as a deposit. If HGP does not receive a response from its attempts to contact Buyer or if the Buyer does not provide a deposit, HGP reserves the right to refuse or cancel Buyer’s bids. For Onsite and Webcast auctions, winning bidders can request a printed paper invoice from the Accounting Manager at the sale location during or after the sale. Electronic Bidders will be sent an electronic invoice to the email address provided during registration. Detailed payment instructions for each sale are available in the printed lot catalog at the sale location on the day of the sale. Electronic Bidders will be sent detailed payment instructions via email along with their invoice. All payments must be by federal wire transfer of immediately available funds and all of the foregoing must be in form, scope and substance acceptable to HGP. Credit cards are only accepted for Electronic bidding registration and for Liquidated Damages in the event of a default.

    No title shall pass to Buyer until the total purchase price and all Taxes have been paid to HGP in collected funds. To receive the benefit of any tax exemption, Buyer must supply HGP with a sales tax exemption certificate acceptable in form, scope and substance to HGP in HGP’S sole discretion. Acceptable forms of payment are wire transfer, cashiers or certified check and company check with a bank letter of guarantee. If the auction is conducted as a webcast sale (simultaneously conducted live on-site and streamed over the Internet for online participation), a different Buyer’s Premium may be applicable and will be announced at the time of that specific sale. ANY ITEMS NOT REMOVED ON OR BEFORE THE REMOVAL DATE SHALL BE DEEMED ABANDONED AND HGP SHALL HAVE NO FURTHER OBLIGATION TO BUYER WITH RESPECT TO SUCH ITEMS. Buyer shall be responsible for the safe and proper removal of any Goods purchased by Buyer. HGP does not pack, ship, store, crate or rig items for removal. Buyers may either pick up Goods at the designated auction site themselves or can contract with a third party agent to manage the removal process for them. Before Goods can be removed by an Agent, Agent must provide HGP with (1) proof of payment in full (Paid in Full Invoice) and (2) An “Agent Release Authorization” form which allows HGP to release items to a third party contractor for shipping, crating or packing purposes. Goods weighing more than 100 pounds must be removed by a qualified, insured rigger. Before any removal, Buyer must provide HGP with a certificate of insurance from the rigger, which certificate must be in form, scope and content acceptable to HGP in HGP’S sole discretion. HGP shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines. Buyer is solely responsible to properly remove and store in appropriate containers all fluids, oils, hazardous chemicals, etc., from machinery purchased.

    Buyer does hereby indemnify HGP, the Consignor and the owner of the premises in which the Goods are located, from any and all claims, damages, and losses arising from Buyer’s actions or actions with respect to the Goods and Buyer’s presence on the premises in which the Goods are located, including without limitation, injuries to persons or property and environmental violations or contamination. Risk of loss on any Goods shall pass to the Buyer upon payment in full to HGP of all sums due from Buyer in respect to the Goods. HGP shall have no responsibility whatsoever for any missing or lost items that can be removed by hand if such items have not been removed within forty-eight (48) hours of the conclusion of the sale. There will be NO removal of any lots until the auction is complete. All items awarded to high bidders are contractually theirs and must be paid for by the Final Payment Date and removed by the Final Removal Date.Failure to pay invoices in full by the Final Payment Date in accordance with payment terms will subject Bidder to pay as Liquidated Damages a sum equal to the lesser of (1) 20 percent of the invoice price of the item(s) as to which the default has occurred, or (2) the full amount of the difference between the original invoice price and the re-sold price plus any expenses incurred to re-market or re-sell these items. IF HGP HAS NOT RECEIVED PAYMENT FOR WINNING BIDS WITHIN 24 HOURS OF THE FINAL PAYMENT DATE, THE BIDDER AUTHORIZES HGP TO CHARGE LIQUIDATED DAMAGES TO THE CREDIT CARD LEFT ON FILE DURING THE REGISTRATION PROCESS. Failure to remove items by the Final Removal Date in accordance with removal terms will subject Bidder to pay as Liquidated Damages the full amount of the expenses incurred to store or transport items until they are re-sold.Buyer must make all requests for adjustments in writing to HGP before any item is removed from the premises where the auction is conducted.


    votre commentaire
  • gerber hs 15 plus plotter manual

    Download Link: ➡ gerber hs 15 plus plotter manual



    File Name: gerber hs 15 plus plotter manual.pdf
    Size: 4267 KB
    Type: PDF, ePub, eBook
    Category: Book
    Uploaded: 29 May 2019, 13:23 PM
    Rating: 4.6/5 from 647 votes.


    Last checked: 19 Minutes ago!









    ⬆ LINK ⬆




















    In order to read or download gerber hs 15 plus plotter manual ebook, you need to create a FREE account.

    eBook includes PDF, ePub and Kindle version



    ✔ Register a free 1 month Trial Account.
    ✔ Download as many books as you like (Personal use)
    ✔ Cancel the membership at any time if not satisfied.
    ✔ Join Over 80000 Happy Readers


    Book Descriptions:

    gerber hs 15 plus plotter manual

    Attempts to manually move the plotter drum, rotate or force the tool up or down may damage the plotter. CAUTION: While power is off, center the carriage by gently pushing toward the center of its travel. To feed and align the material 1. Feed the material through the plotter as shown in the appropriate diagram, according to the type of material you are working with. 2. Tape the ends securely to prevent the roll from unraveling.This pressure ensures uniform cuts and pen lines. Tool force is adjusted by turning the small tool force knob on the end of the tool force housing, as shown in the illustration below. Gerber recommends experimenting with tool force settings as well as plus keeping a logbook of the settings. Refer to the HS15 Tool Force Settings Reference Card for guidelines. After loading the plotting paper, install the pen holder in the carriage spindle as follows: To install the pen holder 1. Select the pen holder with pen installed from the tool rack attached to the rear cover. Additional pens are available through your Gerber distributor. To replace a pen 1. Insert a flat-tip screwdriver into the notch at the base of the tool cap (see below). Do not over-tighten the set screw or the pen could be crushed. 7. It can also be used for vinyl character alignment on a 15-inch plotter when the job is much longer. The pounce wheel is designed to pounce (perforate) holes either perfectly aligned or off- center to the direction of travel. There should be one installed on the pounce wheel holder. If not, slip a lift washer from the tool kit over the barrel and slide the washer to the top of the holder. In testing, Gerber cut over 10,000 one-inch letters using a single blade before testing was discontinued with the blade still cutting satisfactorily. Other blade manufacturers have unsuccessfully attempted to duplicate this cutting plus precision and durability. Replacement procedures for the tangential and swivel knife blades are different.

    • gerber hs15 plus plotter manual, gerber hs 15 plus plotter manual, gerber hs 15 plus plotter manual pdf, gerber hs 15 plus plotter manual download, gerber hs 15 plus plotter manual user, gerber hs 15 plus plotter manual instructions.

    GRAPHIX ADVANTAGE and GerberCal are registered trademark of Gerber Scientific Products, Inc. 3-in-1 is a registered trademark of Boyle-Midway, Inc. HPGL is a registered. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. Draws, cuts, and pounces up to 13.0 inches high. Using the plus system Panel feature, the HS15. Step-by-step user's manual.As you plus unpack the HS15 plotter, inspect all items for damage that may have occurred during shipping. Report any damage to your distributor at once. Save all packaging materials in case it becomes necessary to transport the plotter at a future date. The photograph may not contain all the parts listed. Pen holder with pen Tangential knife holder with blade Pounce wheel holder Tool lift washers (on tool holders) Allen wrench Pair tweezers Spare red pen. Follow these instructions to install the HS15 plotter to the. If you intend to operate the GRAPHIX ADVANTAGE plus HS15 with software other than the GRAPHIX ADVANTAGE plus please contact your software vendor for an HS15. GRAPHIX ADVANTAGE 1. Insert the 9-pin connector at the end of the RS-232 cable into the 9- pin RS-232 connector on the back of your GRAPHIX ADVANTAGE This connector is normally labeled Plotter or COM Port 2. Power Cords plus 1. Insert the female connector of the HS15 plotter power cord into the socket on the rear panel of the plotter. 2. Your system is now set up to use the HS15 plotter. Note: The Default Plotter note in the lower right corner of the dialog box tells you the name of the plotter your jobs will be sent to unless otherwise specified in the Plot program. Gerber vinyl products in high performance or intermediate grades are translucent, reflective, or metallic and come in a wide range of colors. Also available are direct cut silk screen, ruby photo film, paint masking material, rubber sandblast stencil material, and heat transfer materials.

    When an error condition occurs, the plotter may turn off power to the servo motors. There will be continuous beeping and flashing lights. Error Signals There are three kinds of error signals: 3-second steady tone, lights on (running job) Error conditions are assigned a 2-digit number. The number is displayed by flashing lights and beeping, one digit at a time.X axis error Call Gerber Field Service. Call Gerber Field Service Department at 800-828-5406 (in the USA), or fax at 203-645-2448. Z axis error Call Gerber Field Service. Theta axis error Call Gerber Field Service. RS-232 test failure Call Gerber Field Service. Illegal plot data command Check plot data;. In addition, instructions for fuse replacement are included.Apply with a lint-free cloth. 3. Tip the plotter on its left side. CAUTION: Do not rest the plotter on its right side. Do not use the way shaft to lift or turn the plotter. Oil the bail arm pins. Note that the carrier has a white arrow on it pointing to the right (as do the two arrows on the black plastic plate). 5. Remove any blown fuse. Install a new fuse of the same type and rating (5-amp Slo-Blo) in the same place. Note: Gerber warranties do not cover unauthorized repair. Some service procedures require delicate adjustment of plotter parts. If. Call Gerber Field Service. If the condition occurs in the Axis Swap mode (see GRAPHIX ADVANTAGE Reference), the Y Axis (backlash) needs adjustment. Call Gerber Field Service. See the next page for the procedures to follow to access the board. The numbers in parentheses in the text refer to the numbers in the diagram. Z AXIS (TOOL HEIGHT) ADJUSTMENT Symptoms The tool does not touch the material or touches only between characters. Note: If a “half moon” is worn on the wedge (33), do not attempt any further modification. Call Gerber Field Service. THETA AXIS (TOOL ROTATION) ADJUSTMENT Symptoms Letters have jagged or serrated edges. It should rotate and stop between the opto-sensors (located under 65).

    To replace the tangential knife blade 1. Take care when installing a new blade. CAUTION: Do not handle the blade with other tools. It is fragile and subject to breakage if mishandled. 1. Remove the plastic adjustment shoe from the base of the tool holder by rotating it counterclockwise until it comes. This tells the controller the plotter travel limits. The carriage then backs away from the bail arms to allow you to open the bail arms for material loading. SLOW SLOW Press the left and right slew keys to unroll material before plotting, to position the tool for plotting, to position the carriage and material between jobs, and to rotate the drum and feed material through the plotter or back toward the roll holder. When swivel knife mode is selected, the light over the SWIVEL key is on. Heavier material (such as reflective vinyl) requires increased tool force settings, no matter what mode. Also, be sure that there are several inches of paper extending past the carriage spindle and to the left of the plotter. To stop a continuous mode plot plus 1. Press either Run key. The HS15 stops the plot at the next logical break in the program. Note: The slew keys may be pressed to maneuver the carriage or material. RESET To cause an emergency stop Press the key while a job is plotting. The following sequence RESET occurs: plus. Used to check X, Y, Z axes in plot mode and to verify operation after. Use to test cut quality. Note: If the plotter consistently fails a special diagnostic, contact Gerber Field Service Department at 800-828-5406, or fax at 203-645- 2448. WAGON WHEEL TEST PLOT To plot the Wagon Wheel Test Plot Load plotting paper and install the pen holder. RUN SINGLE RUN CONT 5. Compare the test plot to the illustration below. If they do not look the same, call Gerber Field Service. RUN SINGLE RUN CONT 5. Compare the test plot to the illustration below. If the plot is different, contact Gerber Field Service.

    Ultra strength, extremely wear-resistance, shock resistance quality cemented carbide material. Heavy duty material. Enjoy Top Quality Plotter Blade- photo for reference only.These belts are brand new. Not used, and we warranty them for 1 year. The Plotter Doctor has been selling.We have other parts available as well. http:www.theplotterdoctor.com Shipping: we ship world-wide. Warranty: 1 year Jim 562-633-4132 Powered by The free listing tool. List your items fast and easy and manage your active items. Single or low-ply static cutter, designed to cut a wide variety of materials.Shipping charges are not included in the price of this machine. Tangential cutting plotter. 15 inch. Real work horse. Drum Roller just replace. I have tested this Plotter and operates as it should. This Plotter can be used in your business or as a backup. Comes with serial cable. Power cord and pen holder.Any questions. Please ask before bidding. It's in great shape and has served me well for about 10 years. The plotter really shines when you have big jobs- I have run many 50 yd roles through it. Leaving it to cut through the night. I have all the paperwork and manuals. It's a fantastic deal, saving you thousands of dollars and giving you a moneymaker in return. Comes with one wall vinyl rack and a Dell tower. But it can also handle the toughest and thickest materials and laminates. This digital die cutter integrates with the Gerber Edge FX printer to cut inside and and outside shapes on your. more label. Decal, or overlay. Should work, but i can not guarantee it because i don't know about it or how to check it. Have not checked to see if it is working properly, has some electric and computer cord repair(see pics) but was working when put away. And has signs of wear and use with some buttons on keyboard cracked(see pics) Includes Auto Kerning, multi-line, rotate, arcing, auto number, X Y moves plus more. It has many font cards, see pics for details: Helvetica Med.

    If this does not occur, call Gerber Field Service. Otherwise, continue with the next step. 9. If the disk is clean and centered and homed correctly, loosen the Allen set screw (47) but DO NOT MOVE THE DISK. You may find it helpful to refer to the plotter diagram in the Appendix while performing the adjustment procedure. Gerber Field Service may refer you to this diagram to help you identify parts when you need to make plotter adjustments. The names of plus the parts are listed in the “HS15. Sensor Disk Cam Assy. Rear Way Grooved Drum Assy. Front Way Bearing Ball.375 x.875 x.281 Left Bail Arm Assy. Right Bail Arm Assy.Spindle Belt Screw 4-40 x.312 PHH Lk Wash Adjusting Pad Tool Lifter Pivot Front Idler Pulley Assy. The HS15 returns to the off-line status (as at RUN SINGLE power-up) after each job and waits for the operator to press key again to RUN SINGLE plot the next job. Theta motor encoder failure Call Gerber Field Service. Power relay off Try power up again or call Gerber Field Service. X axis error Call Gerber Field Service. Y axis error Call Gerber Field Service. Call Gerber Field Service. Illegal interrupt error Try power up again. Unknown interrupt error Try power up again. Theta home error Try power up again. Please upgrade your browser to improve your experience. Please enable JavaScript to improve your browsing experience. Resources. Parts Gerber Edge Printer. Gerber Plotter,Flexisign Window tint, etc. The Plotter Doctor has been selling and repairing Gerber products since 1985. We have other parts available as well. Shipping: we ship world-wide. Price is calculated based on your location. The Plotter Doctor 562-633-4132 We have other parts available as well. The Plotter Doctor 562-633-4132 Roland Graphtec Mimaki SignPal Ioline Pcut Durability, super strength abrasive carbide cutting tools. Product Description Premium class plotter blade.. more Product line covers wide selection vinyl cutting plotter. Made from costly.

    This 48” engineering marvel offers the best of all worlds.Gerber enVision plotter with eye piece in excellent condition. Gerber Edge 2 printer in excellent condition. Software included on a Dell PC. Keyboard, mouse, HP flat screen monitor. Local pick up and serious offers only. This is a package deal and I prefer not to split them up. Feel free to ask any questions and I will be glad to coordinate a time to demonstrate the machines for you. Posted with Just send me a message. OEM USB Dongle Note: The Omega 1.56 CD has some minor scratches but installs properly. There is a second copy of the disk with this package. I am selling this fully tested set simply because I have an extra set of Omega which I currently use. Note that you will need to sign for this upon delivery. Both are in excellent condition, and work with no issues. The plotter has a new drum recently installed from plotterdoctor which has a 5 year warranty, Will include 35 different foils for the printer, Most are new, and the roll holder for the printer. Also included is the serial cable for the plotter( this one is hard to find) Let me know if you have any questions. Shipping is free through fedex ground with full insurance. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items. Cutter operates without any issues and is in great condition. Purchased less than one month ago from original owner who used it very lightly. Decided to go with a smaller model. Power cord and parallel to usb included. Software is not included. Will ship for free to US 48 states Posted with Please see pictures. Pictures shown are of the actual item(s) you are bidding on. This auction includes only what you see pictured. Payments: Payments must be received within 3 days or we will file a non paying bidder report and the item will be relisted. Please note. If you enter the wrong billing address your card will be declined. Taxes: 7.125% Sales Tax to Minnesota buyers.

    All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. We Ship to the Continental. These will cost more. We no longer ship to Hawaii. We Ship to confirmed Paypal and Billing addresses Only. Local Pickups: We offer local pickups but please contact us for details. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow. We do not offer Buyitnows. Will you ship to this country or this country. We ship to the US only. What is the history of the item. Most of our items are used and we do not know the history. We test them and picture their current condition. What's Included? 99% of the time If it's pictured it's included.For use with Vinyl cutters.Perfect for motocross graphics, of other niche businesses. Gerber GSP Graphix 2 GX-2 Font Machine 2” Vinyl Letter Printer Plotter SKU: JV-JIM-B-GSPGRAPH2 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc.If in doubt, please contact us before purchasing. Click an Image to Enlarge Gerber Scientific GSP Graphix 2 GX-2 Font Machine 2” Vinyl Letter Cutter Includes Helvetica Medium Font Module(PD18354) Model: GX-2 Physical Condition: Some scuffs and scratches. Able to enter text and start a cutting cycle. Able to adjust blade in full range of motion. Vinyl sheet wheel progresses and reverses. We do not have the necessary resources to further test this unit. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc.If you require more information and specifications.

    Helvetica Bold, Clarendon, Times Bold, Dom Casual, Charter Oak,Commercial.Other extra parts and font modules included, see pics for details. Machines similar to this sell for parts for upwards of 200.00 with out all the Font Modules and Clip Art Module, and all extra parts. This machine is rare due to the fact of it's good condition, functioning correctly and it being the world's FIRST(1983) low-cost, easy-to-use, automated vinyl lettering system.It is in good overall used condition. The lid has a crack in it(see pictures) The control panel cover is loose. Not sure if it is missing screws. But you can lift it slightly(see pictures) so we wanted to note that. See pictures for details of item and condition. Click on them for a larger view. FUNCTIONALITY: Ready for initialization. We will guarantee it to work upon arrival. AUCTION INCLUDES: Gerber enVision 375 printer only as pictured. NO blade. Media, software key or accessories. Auction items include only what is in the eBay picture(s) unless otherwise specified. more above. Including manuals, cables, cords, SD cards, power supplies, etc. MODEL: ENVISION SN: E15-110001 RETURN POLICY We guarantee that this item will be in the condition stated above upon receipt. We offer a 7 day return policy in the event the item is not received as described. Otherwise the return will be rejected and refund will not be given. Return shipping is the responsibility of the buyer. Items returned, but are as described in original listing will be subject to a 20% restocking fee and original shipping will not be refunded. SHIPPING INFO Our goal is to ship your item within 1-2 business days after payment has cleared. Freight items may take 2-3 business days. For your and our safety, we only ship to the confirmed Paypal address(AKA billing address) if you choose that option. Need it shipped elsewhere. Pay via cashiers check.

    However in the event that an item is damaged during transit, buyer must notate that with the driver before signing for the package. Keep the box and all packaging mater Manufacturer: Gerber Model: 750 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Gerber Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: This item was not fully tested. Since we do not have the proper resources. The cover has a crack in it and the left corner of the case has a piece broken off, as seen in the pictures. When powered on the plotter went through its self-test, aligned the cutting head and then displayed the main menu. We were able to toggle through several of the function pages, as seen in the pictures. We got the roller to.No further testing was performed. This item does not come equipped with any cutting assemblies, vinyl roll bars, cutting assembly cover or software. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms One of the best cutter plotter on the market, cuts fast and accurate. Cutter operates without any issues. Was not heavily used, Rubber on friction wheels is in great condition. Automatically aligns media so that printed graphics can be accurately contour cut. Includes: manual. powercord. software not included. Please ask any questions prior to bidding. Sell to the lower 48 states of the continental US only. No international please. Gerber ODYSSEY 52 Vinyl Cutter Plotter The Gerber ODYSSEY with GerberDrive is a breakthrough. First-of-its-kind plotter which combines the ultra-precise tracking of a sprocket-feed plotter with media-width flexibility.. more Providing extreme accuracy in material tracking and alignment demanded by sign shops for long signs and unattended operation.

    As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. If we don't have enough units listed, we may be able to ac Head unit moves in and out. Rollers roll right and left.I do not have the knowlege or supplies to do so.Physically in Great shape- not really much signs of use. I find them mostly at Swap Meets, Estate Sales and second Hand stores. I try to describe them to the best of my abilities. Some obscure items I may not have much knowledge about. Please note that it is a USED item and may have other issues that are not described. Please ask questions before bidding if you have concerns. I guarantee. more most of my items, but you will have to pay the return shipping if the item is returned. All international items will be valued at the bid price. Please do not ask to have the value be stated lower. Thank you for being interested in out items. Pickups are welcome on all items won locally. All California sales will incur 8% sales tax. Was in working condition when retired 6 years ago, I recently powered it up and it looked good. This is a complete system with everything you need to run a CAD business. Although some of the PCs are older. They are all pre-configured and ready to run out of the box. This is as close to a plug-n-play installation as you can get. Accumark Software v7.6(includes 2 ACM Marker Keys and 1 ACM PDS Key) Gerber Nester Software(includes Key and attached Compaq Desktop) Note: Requires.Specifications(PC) OS: Windows 98. Gerber Booster Pak and Optiplan Software(includes Optiplan Key) It has been used that way for over a year. We will include 25 foils for the purchase price. We are located in West Chester. PA. Buyer is responsible for shipping costs. Print, Cut solution. The enVision 375 is our most popular cutter not just because it is amazingly fast. This digital die cutter integrates with the Gerber Edge FX printer to cut inside and outside.

    Decal or overlay. We highly recommend this cutter if you are going to use laminates or transfer adhesives in your label construction. Their high performance servo-drives and continuous automatic systems assure a precision cut at every position. Superior sprocket-feed technology This ensures positive material tracking for outstanding results— no slipping. No skewing, no waste and no guesswork. Reliable Operations enVisions perform so reliably all by themselves. You can become a multi-tasker instead of babysitting the plotter. Micrometer knife holders. That means you can dial out exactly 4 mils of knife blade to cut 3 mil vinyl with 1 mil of adhesive. Using this tool properly will insure proper cutting depth. When the cutting depth is set on the knife holder as described above. The only variable is the cutting force, which can be incre Gerber GS-15 Plus Digital Demand Die Cutter Plotter. Item Description. Manufacturer Gerber, Model Number GS-15, Category Industrial Die Cutter, Cosmetic Wear Item has spot of light marker writing. Some surface scratching. Functional Condition We powered the item on. Then tested its ability to respond to controls. The item responded properly, including knife functions, but cutting head seemed to slip a little when traveling from right to left. Arrow keys will need to be pushed in increments to move left. Items Included In Listing Item as pictured with power cord only. Not Included Manual. Software, additional accessories not pictured. Shipping charges seem too high.Country, and postal code. Sorry, we do not use customer shipping accounts. Please note we only offer shipment via UPS unless otherwise specified. Want to pick up an item to save on shipping. Please let us know that you wish to pick up the item locally. Our hours for pick up are M-F 10-4pm. Please note Virginia sales tax of 5.3% will be charged for all items locally picked up. We have recently moved our new address is: C2 Management 351 Station Rd. Berryville, VA 22611.

    540-955-5740. Buying more items from us. We offer a discount for additional purchases that can be shipped together. After the first won item please notify us that you are still bidding.do not pay until you are finished bidding so that we can get you a combined shipping total. Please request combined shipping total. We allow up to 7 days for items to be added to an existing order. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By Save time preparing for and outputting to various devices, and helps users optimize their production with tools to automatically leverage features that already exist. You get more original design details and less reassignment of design elements or re-creation of file parts. AI PDF EPS PS TIF JPEG BMP TTF Windows Clipboard And more. GERBER EDGE 2 FEATURES: The GERBE There are signs of use and storage. Such as dust and light marks in the body. Tested: The item turns on and the fan works. The plotter was in working condition when last operated roughly 6 months ago. It may need some adjustment and light cleaning to be put back into full working condition. The instructions are not included. Free instructions are presently available for viewing and download at various internet sites.See detailed pictures for additional included parts. Description The GS15 plus is a state of the art 15-inch(38.1 cm) plotter designed for use with the GRAPHIX ADVANTAGE system and other sign design systems. Note: When used with GRAPHIX ADVANTAGE systems. The GS15 plus requires GRAPHIX ADVANTAGE 4.3 or higher. When GS15 plus is used with other sign design systems. Contact the system manufacturer to obtain a driver for the GS15 plus.

    Which offers the operator a choice of two cutting modes selectable from the plotter keypad: Tangential Knife Mode keeps the blade aligned with the direction of plotting motion for cutting thick materials such as sandblast stencil and for pouncing patterns. Swivel Knife Mode is used for rapid cutting of all but the most demanding materials such as sandblast stencil. Easy-to-weed corners in swivel knife mode. Performance: The GS15 plus is designed to precisely register graphics up to 50 yards(45.7 meters) long using carbide blades for crisp. Sharp cuts. When used with the GRAPHIX ADVAN The Edge Prints a 11.75 Area There is a Bad pixel On the High side at About 11.25 Does not Effect the print if kept below that. Small Sign when you panel the print. Has been a great money maker for us. We have bought a new printer so we no longer need the Edge. The Roland Plotter Works Great as well We will ship to the low 48 There would be 5 Boxes could get pricey. Will only charge the UPS Fees we get charged. Or Loacle pickup I would be willing to Travle 100 Mile to meet somone. Im thinking it could get as high as 300.00 to ship. Scroll down for full-size photos. Item Description Gerber Knife Holder. Cutter head needs new blade. How will my item be shipped. I always ship via the US Postal Service. US Domestic packages will be shipped by either 1st Class Mail(under 13 oz) Priority Mail(over 13 oz) or sometimes by Parcel Post for larger packages. All domestic(US) shipments include free delivery confirmation. You will receive a delivery confirmation number by e-mail when your item ships. International packages will be shipped by USPS First Class International or Priority International. Non-US bidders should e-mail for a shipping quote prior to bidding.. more Will you pack my item carefully. Buyers can expect careful packaging of items for safe shipment. I make liberal use of bubble wrap.

    Padding and strong cardboard boxes where needed to help ensure that merchandise will make it safely through the postal system. Will you ship outside the United States? Yes. International buyers are welcome. Shipping times vary for international shipments depending on the destination country and how long your Customs department takes to process the package. Your patience is appreciated. Please note- The declared value on the customs form will reflect the final sale price of the item. Not including shipping. I am unable to declare sold merchandise as a gift on the customs form. Buyer is responsible for all taxes. Tariffs or handling charges that their home country may charge when the package is picked up or delivered. Payment by accepted from all buyers. Domestic and international. Dear Bidder or Buyer, I believe strongly in disclosing details about wear and appearance in my auction descriptions. Whether positive or negative, so you will know what to expect. I do my best to describe each item fairly and accurately. If you think an item you p But I have no actual vinyl to test with. Comes with Helvetica font cartridge Used condition. Cuts vinyl well. It is a little tired and has trouble with reflective vinyl or magnets. But for everyday use this works well. I have upgraded to a new plotter. I have a Windows XP computer with it that runs it. I don't have the install disks for the software. I'm throwing in the computer for free for that reason. I'm getting some vinyl to actually test it on. This comes with a printed manual. This is a Gerber HS-15 Plus Graphic Plotter Vinyl Cutter it has been used but still works has extra blade and alignment tool and would be great for anybody who needs one A vinyl cutter from the early 1980s. I have typed in a bit of text and pressed the start key and the cutting head and rollers move around as they should from what I can see.


    votre commentaire
  • gerber gs750 plus plotter manual

    Download Link: ➡ gerber gs750 plus plotter manual



    File Name: gerber gs750 plus plotter manual.pdf
    Size: 2641 KB
    Type: PDF, ePub, eBook
    Category: Book
    Uploaded: 1 May 2019, 12:10 PM
    Rating: 4.6/5 from 634 votes.


    Last checked: 7 Minutes ago!









    ⬆ LINK ⬆




















    In order to read or download gerber gs750 plus plotter manual ebook, you need to create a FREE account.

    eBook includes PDF, ePub and Kindle version



    ✔ Register a free 1 month Trial Account.
    ✔ Download as many books as you like (Personal use)
    ✔ Cancel the membership at any time if not satisfied.
    ✔ Join Over 80000 Happy Readers


    Book Descriptions:

    gerber gs750 plus plotter manual

    Before unrolling vinyl for a job, determine how much material you need. This pressure ensures uniform cuts and pen lines. Gerber recommends experimenting with tool force settings as well as keeping a logbook of the settings. Refer to the Plotter User. The tool rack was attached during assembly. Tool Holders For quick identification, each tool holder has a different colored cap. After loading the plotting paper, install the pen holder in the carriage spindle as follows: To install the pen holder 1. Select the pen holder with pen installed from the tool rack molded in the rear cover. Additional pens are available through a Gerber distributor. To replace a pen 1. Insert a flat-tip screwdriver into the notch at the base of the cone-shaped cap (see below). Do not over-tighten the set screw or the pen could be crushed. Using the pounce wheel in the angled position causes the points to drag slightly as the wheel moves forward. Reduce plotter speed if pouncing small holes. POUNCE WHEEL REPLACEMENT One pounce wheel supplied is installed in the tool holder, and a spare is included in the tool kit. To replace the pounce wheel 1. In testing, over 10,000 one-inch letters were cut using a single blade before testing was discontinued with the blade still cutting satisfactorily. Other blade manufacturers have attempted, unsuccessfully, to duplicate this cutting precision and durability. Tangential Knife - Used to cut all materials, including sandblast stencil. WARNING: The blade is very sharp. Take care when handling the knife holder and blade. If the tool force setting is correct, but the weed does not peel up easily, or letters peel up with the weed, adjust the shoe to expose more of the blade instead of increasing the tool force setting. Note: Do NOT use a micrometer or calipers to measure the vertical distance; it may damage the knife blade tip. 3. Put the plotter on-line for drawing, cutting, and pouncing. Select single or continuous job processing. Select knife mode.

    • gerber gs750 plus plotter manual, gerber gs750 plus plotter manual user, gerber gs750 plus plotter manual parts, gerber gs750 plus plotter manual pdf, gerber gs750 plus plotter manual instructions.

    GRAPHIX ADVANTAGE is a registered trademark of Gerber Scientific Products, Inc. 3-in-1 is a registered trademark of Boyle-Midway, Inc. HP-GL is a registered trademark of Hewlett Packard. 3M, ScotchCal and Scotchlite are trademarks of 3M. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. Draws, cuts and pounces up to 28 inches (710mm) high. Using the GRAPHIX ADVANTAGE system Panel feature, the. CAUTION: A caution statement contains information which, if not observed, could result in damage to the equipment. WARNING: A warning statement contains information which, if not observed, could result in personal injury. As you unpack the GS750 plotter, inspect all items for damage that may have occurred during shipping. Report any damage to your dealer at once. Save all packaging materials in case it becomes necessary to transport the plotter at a future date. Plotter Stand Assembly 1. Install six plastic grommets in the roll support Stand Assembly bar holes on the inside of the stand legs. To mount a roll of material on a roll support bar, lift the bar to the top of the hole and slide it toward one leg assembly to free the opposite end. Communication Parameters plus If you are connecting the GS750 to a system other than the GRAPHIX ADVANTAGE, the plotter uses these RS-232 communication parameters: Communication. Your system is now set up to use the GS750 plotter. Always insist on Gerber authorized materials for highest quality results. To load material CAUTION: It is recommended that you load material without a tool in the carriage to prevent damaging the knife blade. Be sure that the carriage spindle is not located at either extreme end of its travel and that both ends of the rubber drum can be reached easily. Match the three closely spaced sprocket pins and holes. 2. Tape the ends securely to prevent the roll from unraveling.

    Cover Removal When making certain adjustments to the GS-750, you may find it necessary to remove the covers from the sides of the plotter. The knife does not cut deeply enough. The tool height changes in the middle of a job. OBJECTIVE To set the height of the lift fork for consistent contact of tool holder with material. The tool loses position in the middle of a job. OBJECTIVE To center lift fork over carriage spindle bore; to align tool holder in carriage spindle. Rotate the rear way to find the screw in the motor collar clamp, and use the Allen wrench to ensure that the screw in the collar clamp is tightened securely. 4. If the pin is aligned correctly, proceed to a test cut, step 12. If the spindle pin is not aligned correctly, go to the next step. Press either Run key to plot. If symptoms persist, call Gerber Field Service Department at 800- 828-5406 or fax at 203-645-2448. ADJUSTMENT PROCEDURE 1. Turn the plotter power off. 2. These two gears are meshed together. Gently push back and forth on the drum in the direction the material normally moves. Notice if the X axis gear moves while the pinion remains stationary. Loosen these screws. Apply light pressure to the motor to tighten the mesh of the X axis gear and the X motor pinion. These two gears are meshed together. Gently attempt to rotate the jackshaft gear. With one finger on the motor pinion, notice if the jackshaft gear moves while the pinion remains stationary. If the pinion moves with the jackshaft gear (i.e., if there is no backlash), no adjustment is necessary. When the swivel knife SWIVEL KNIFE Key mode is selected, the light over the SWIVEL KNIFE key is on. If the tangential knife mode is desired, the light must be off. Use the INIT KNIFE key to initialize the swivel knife so that the blade faces 0. Theta home failure Turn off the system; check connectors. Please check your inbox, and if you can’t find it, check your spam folder to make sure it didn't end up there.

    In normal or slow mode, the platen or tool move continuously as long as the arrow keys are pressed. If the tangential knife mode is desired, the light must be off. Press SWIVEL KNIFE to turn the light on and off. RUN SINGLE may be used with either swivel knife mode or tangential knife mode. To stop a continuous mode plot plus Press either RUN key. The GS750 stops the plot at the next logical break in the program. Do not use slew keys or orientation for the current job will be lost. To cause an emergency stop Press the RESET key while a job is plotting. The following sequence occurs: plus 1. The steps to access these diagnostics and their functions are outlined below. To access special diagnostics 1. Use to check internal workings of the communications hardware. Beeps indicate a communications error. (A special loop-back test part is needed for this test. See your Gerber distributor.) X,Y, Z Axes Lock Press the right arrow key to access. If the plot is different, contact Gerber Field Service. If the plot is different, contact Gerber Field Service. When an error condition occurs, the plotter will turn off power to the stepper motors, flash the RUN lights, and sound a steady tone. If the plotter consistently fails the self-check tests, contact Gerber Field Service Department at 800-828-5406, or fax at 203-645-2448. Cleaning and Lubrication Routine cleaning and lubrication should be done monthly or after every 160 hours of use, whichever occurs first. Isopropyl alcohol should be used to clean dirty parts. Rotate the cam shaft and theta shaft (the front way does not turn) and move the carriage spindle for access to the entire length of these shafts. Install a new fuse of the same type and rating in the same place. If the fuse blows again, contact the Gerber Field Service Department. 5. Reinsert the carrier, making sure the carrier is inserted all the way.

    Install a Phillips screw through each tab into the plotter assembly. Repeat this procedure with the other two roll support bars. To mount a roll of material on a roll support bar, lift the bar to the top of the hole and slide it toward one leg assembly to free the opposite end. Leave about four feet of space both in front of and behind the plotter to allow the material to move freely. The cable is 10 feet long, so the plotter need not be located immediately beside the console; however, it should be close enough so there will be no strain on the cable after installation. If it stands on an uneven surface, use an adjustable wrench to adjust the feet on the bottom of the leg assemblies. This connector is normally labeled Plotter or COM Port 2. Use the connector thumb screws to secure the cable to the system. Secure the cable to the plotter with the connector thumb screws. Attempting to manually move the GS750 plus in any axis of movement while the power is on may damage the plotter. Only the Power light remains on. This is the initial setting at power-up. Click once on the Plot Spooler icon, then click on Close. The Setup program opens. Your system is now set up to use the GS750 plus plotter. They must be added one by one. If only one plotter is installed to the GRAPHIX ADVANTAGE system, that plotter will automatically be assigned as the default plotter. The system will return to the GSP GRAPHIX ADVANTAGE program group. Gerber vinyl products in high performance or intermediate grades are available in translucent, reflective, or metallic finishes and come in a wide range of colors. Also available are direct-cut screenprint stencil, ruby photo film, paint masking material, rubber sandblast stencil material and heat transfer materials. Consult your Gerber distributor for further information about available materials, colors and prices. Always insist on Gerber authorized materials for highest quality results.

    Please also check your spam folder. All Rights Reserved. In consideration of the furnishing of the information contained in this document, the party to whom it is given assumes its custody and control and agrees to the following: GRAPHIX ADVANTAGE is a registered trademark of Gerber Scientific Products, Inc. 3-in-1 is a registered trademark of Boyle-Midway, Inc. HP-GL is a registered trademark of Hewlett Packard. 3M, ScotchCal and Scotchlite are trademarks of 3M. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own risk. Performance of the GS750 plus plotter is assured by: It assumes the operator is familiar with the GRAPHIX ADVANTAGE system. It tells you how to assemble, install, operate, and maintain your GS750 plus as follows: As you unpack the GS750 plus plotter, inspect all items for damage that may have occurred during shipping. Report any damage to your dealer at once. Save all packaging materials in case it becomes necessary to transport the plotter at a future date. The boxes contain: Follow these instructions to install the GS750 plus plotter to any GRAPHIX ADVANTAGE. Installation of the GS750 plus to other sign design systems is described separately. Into each stand leg assembly, install the four Phillips screws through the holes in the end of the vanity panel. If installing the Caster Option, refer to the instructions packed with the casters. Be sure the two metal tabs which project from the top of each leg assembly are inside the end plates of the plotter.

    Note: When the GS750 plus is used with sign design systems other than GRAPHIX ADVANTAGE, contact the system manufacturer to obtain a driver for the GS750 plus, installation instructions, and setup information. Plotter Selection Before choosing a plotter close the Plot Spooler. Click once on the Plot Spooler icon, then click on Close. 1. Double-click on GSP Setup. The Setup program opens. 2. Click on Setup. The Setup drop-down menu appears. 3. Click on Plotter. The Add or Delete Plotter(s) dialog box appears. 4. From the Plotters Box, click on GS750 plus to highlight it. Sign up now. All Rights Reserved. This document may not be reproduced by any means, in whole or in part, without written permission of the copyright owner. This document is furnished to support the GS750 plus. In consideration of the furnishing of the information contained in this document, the party to whom it is given assumes its custody and control and agrees to the following: 1. Page 4 Page 5 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Page 6 Page 7 TABLE OF CONTENTS INTRODUCTION. 1 Description. 1 Performance. 1 Convenience. 2 Support Information. Page 8 Plotter Speed. 27 Pounce Wheel Holder Installation. 27 Pounce Wheel Replacement. 28 Knife Holder and Blades. 29 Blade Wear. 29 Blade Damage. Page 9 1 INTRODUCTION Description The GS 750 plus.Page 10 2 GS750 plus Convenience GS750 plus has many features that make it easy and convenient to use. Accepts any standard Gerber materials in 30-inch (762mm) wide rolls. !

    Draws, cuts and pounces up to 28 inches (710mm) high. Using the GRAPHIX ADVANTAGE system Panel feature, the plus can cut text or graphics in strips up to 96 feet long GS750 (29 meters) and 28 inches (710mm) wide. ! Adjustable tool force for uniform cutting with the turn of a dial. It assumes the operator is familiar with the GRAPHIX ADVANTAGE system. Page 12 4 GS750 plus Conventions The following conventions are used in this manual: Note: A note contains important information which could affect successful completion of a task. CAUTION: A caution statement contains information which, if not observed, could result in damage to the equipment. WARNING: A warning statement contains information which, if not observed, could result in personal injury. Page 13 5 PACKAGE CONTENTS This section lists the contents of the GS750 plus shipping plus plotter, inspect all items container. As you unpack the GS750 for damage that may have occurred during shipping. Report any damage to your dealer at once. Save all packaging materials in case it becomes necessary to transport the plotter at a future date. Page 14 6 GS750 plus BOX 3: Paper 50 yds. (45 meters) 20 pound paper for drawing and pouncing BOX 4: Vinyl 10 yds. Page 15 7 INSTALLATION Please unpack the plotter boxes and inventory the contents before you begin to assemble the plotter. Follow these plus plotter to any GRAPHIX instructions to install the GS750 plus to other sign design ADVANTAGE. Installation of the GS750 systems is described separately. Note: Should you experience difficulty during installation of the GS750 plus to the GRAPHIX ADVANTAGE system, contact Gerber Field Service Department at 800-828-5406. Plotter Stand Assembly 1. Page 16 8 GS750 plus Page 17 Installation 9 5. Insert a screw, with a washer, into each of the holes at each side of the plotter stand base. 6. Verify that the alignment between the plotter stand base and the stand assembly is correct, then tighten the screws. 7.

    Pull the end of the material away from and over the top of the roll holder toward the plotter and feed directly onto the rubber drum. Attempts to manually move the plotter drum, rotate or force the tool up or down will damage the plotter. Take care to move the carriage slowly and firmly by gripping the right end of the carriage housing, not by gripping the carriage spindle. Please upgrade your browser to improve your experience. Please enable JavaScript to improve your browsing experience. Resources. It may not display this or other websites correctly. You should upgrade or use an alternative browser. By continuing to use this site, you are agreeing to our use of cookies. Learn More. I am using signlab for my deigns. The plotter recently has started to cut jagged. The design will be cutting perfectly fine then it will go jagged like the knife is not turning correctly. I have replaced the theta belt. I have done a theta Axis Adjustment. I have checked the Theta motor clamps along with the rear way collar. I have oiled all the parts the manual said to. I just don't know what to do now.Do you have any solution?In some cases uninstalling and reinstalling the software (clean install) helps for trouble-free operation. I also use SignLab Vinyl Pro software and occasionally I have such problems. Installing clean always helps me.When you replace the theta belt, you have to make sure that the blade faces the correct way when it resets.Recommended Reading. No claim is made that any information is accurate. As such, each reader should not rely on any information available here as accurate and should independently verify such accuracy. In addition, no claim is made that posts made here will be free from profanity, obscenity, rude, hurtful, libelous or insulting opinions of the poster. Such posts should, however, be reported to an Administrator for review.Your use of this website is your acceptance of these terms and conditions of use.

    COPYRIGHT 1995 Gerber Scientific Products, Inc. All Rights Reserved. This document may not be reproduced by any. Page 4 Page 5: Package contents FCC NOTICE. This equipment has been tested and found to comply with the limits for a Class APACKAGE CONTENTS. Page 8 Plotter Speed. 27Page 9: Support bars 1Page 10: work area plusPage 12: Power cord plusPage 13: Setup 5BOX 4:. Page 15: deleting 7Page 20: Helpful Hints plusPage 22: dial plusPage 23: angle Setup 15. Delete PlottersPage 24: Pen Holder and Pens Page 25: storage 17Page 27: Pen height gage Materials and Tools 19Page 28: Pounce Wheel Replacement plusTool Force DialPage 30: wheel replacement plusAfter loadingPage 34: Replacing blades plusPage 36: replacement - swivel plusPage 37: depth Tools and Tool Handling 29. Knife Holder and BladesIn testing, overSuggested Tool Force SettingsPage 40: Front panel plusThe knife blade holder assembly includes a small metal. Page 42: SWIVEL KNIFE plusPage 44: RUN CONT Page 45: continuous exercise 37This plot mode allows the.Load plotting paper, test the penControlled StopPage 53: Cleaning and lubrication 45Page 54: Fuse Replacement plusPage 55: Sprockets Special Diagnostics 47Page 56: Fuse replacement plusPage 57: Cover removal 49Page 60: Z axis adjustment plusPage 61: Theta Axis (Tool Rotation) Adjustment Maintenance 53Troubleshooting GuidePage 67: X axis backlash adjustment Plotter Adjustments 59Page 68: Y Axis Backlash Adjustment plusRun a multiple line test plot. Page 69 Plotter Adjustments 61. Theta Axis (Tool Rotation) AdjustmentPage 73 Plotter Adjustments 65. X Axis Backlash AdjustmentPage 75 Plotter Adjustments 67Page 78 plusPage 79 GS750 plus PLOTTER USER REFERENCE CARD. SWIVEL KNIFE Key Press the SWIVEL KNIFE key to select knife. Page 80 GS750 plus PLOTTER ERROR CODESBail. Page 82 76 IndexP57348A Rev A.

    Push a tube cap in each open end of the plotter stand base. 8. Install the feet in the bottom of the stand base. If installing the Caster Option, refer to the instructions packed with the casters. 9. Return the plotter stand to its upright position. Page 18 10 GS750 plus Mount the Material 1. First insert the material core end plugs (hubs) into the material rolls. To mount a roll of material on a roll support bar, lift the bar to the top of the hole and slide it toward one leg assembly to free the opposite end. 2. After mounting the material on the bar, return the free end to its hole and slide it firmly down into the locked position. Plotter Work Area 1. Place the GS750 plus near the GRAPHIX ADVANTAGE system so that the material feeds toward you. Page 19 Installation 11 Note: If a plotter is already installed in the PLOTTER port on the GRAPHIX ADVANTAGE, use the TABLET port to install a second plotter. Page 20 12 GS750 plus Power Cords 1. Insert the female connector of the GS750 plus plotter power cord into the socket on the rear panel of the plotter. 2. Connect the power cords for both the GRAPHIX ADVANTAGE plus to the multiple outlet strip included system and the GS750 with the GRAPHIX ADVANTAGE. Page 21 13 SET UP After connecting the plotter to the GRAPHIX ADVANTAGE or other sign design system, use the GSP Setup program in plus accessible. GRAPHIX ADVANTAGE to make the GS750 Note: When the GS750 plus is used with sign design systems other than GRAPHIX ADVANTAGE, contact the system manufacturer to obtain a driver for the GS750 plus, installation instructions, and setup information. Plotter Selection Before choosing a plotter close the Plot Spooler. Page 22 14 GS750 plus 5. Click on the port to which the plotter is connected (COM1, COM2, COM3, or COM4) in the Ports box.Note: There must be two or more plotter names in the Ready for Plotting box to select a default plotter.

    Page 24 Page 25 17 MATERIALS AND TOOLS Materials plus The GS750 uses the same plotting materials as all Gerber plotters. Gerber vinyl products in high performance or intermediate grades are available in translucent, reflective, or metallic finishes and come in a wide range of colors. Also available are direct-cut screenprint stencil, ruby photo film, paint masking material, rubber sandblast stencil material and heat transfer materials. Be sure that the carriage spindle is not located at either extreme end of its travel and that both ends of the rubber drum can be reached easily. 3. Open the bail arms at either end of the drum by pulling them up and away from the drum. Using the slew (arrow) keys, rotate the drum until three closely spaced pins are visible. Page 27 Materials and Tools 19 To feed and align material 1. Feed material under the black cam shaft and over the rubber drum the holes in the material over the sliding sprocket pins first. Match the three closely spaced sprocket pins and holes. 2. Slide the material and the sliding sprocket to reach the fixed sprocket and place the material over these sprocket pins. 3. Center the bail arms over the sprockets. Page 28 20 GS750 plus HELPFUL HINTS. When you change materials, open the bail arms and roll the material back onto the roll. Tape the ends securely to prevent the roll from unraveling. ! Before unrolling vinyl for a job, determine how much material you need. Check the length of the longest line in the job, or the width of an automatically laid out sign or digitized design. Remember that if you are plotting in the Axis Swap mode, you need to consider the height of the job rather than its width. Page 29 Materials and Tools 21 Tool Force Dial The tool force dial on the front of the housing indicates the tool force setting and the amount of tool force or pressure, that is applied to the tool during operation. This pressure ensures uniform cuts and pen lines.

    Tool force can be adjusted by turning the small knob on the end of the tool force housing, as shown in the illustration below. SETTINGS The Plotter User Reference Card at the end of this manual lists approximate tool force settings. Page 30 22 GS750 plus. For drawing, start with a tool force setting between.5 and 1. If your pen does not make a clear dark line, you may wish to increase the tool force setting. ! For pouncing, start with a setting between 5 and 6. ! When cutting regular vinyl in tangential knife mode, try a tool force setting between.5 and 1. ! When cutting regular vinyl in swivel knife mode, set the tool force setting at 1. Page 31 23 TOOLS AND TOOL HANDLING Storage For easy access, the pen holder, knife holders, and pounce wheel holder may be removed from the Dial Head tool kit and stored in the tool rack. The tool rack was attached during assembly. Tool Holders For quick identification, each tool holder has a different colored cap. The cap helps lock the tool in place in the carriage spindle during operation. In addition, red sleeves protect tool tips from accidental damage during storage. Page 32 24 GS750 plus Pen Holder and Pens The pen holder shipped with a black pen installed. After loading the plotting paper, install the pen holder in the carriage spindle as follows: To install the pen holder 1. Select the pen holder with pen installed from the tool rack molded in the rear cover. 2. A plastic lift washer is used to reduce friction between the tool holder and the lift fork of the carriage spindle during operation. There should be one installed on the pen holder. Page 33 Tools and Tool Handling 25 PEN REPLACEMENT Spare pens in blue and red are included in the tool kit. Additional pens are available through a Gerber distributor. To replace a pen 1. Insert a flat-tip screwdriver into the notch at the base of the cone-shaped cap (see below). Pry out the cap. 2.

    Use the Allen wrench supplied with the tool kit to loosen the hex screw located near the tip of the pen. Remove the pen through the top of the holder. 3. Insert a new pen, tip first, into the top of the holder. 4. Page 34 26 GS750 plus 5. Push down on the upper end of the pen until the point just touches the table surface. 6. Use the Allen wrench to tighten the set screw near the tip of the pen. Do not over-tighten the set screw or the pen could be crushed. 7. Replace the cap in the barrel. Pounce Wheel Holder Pouncing is a technique used to create an outline for a sign that will later be hand-painted. Pouncing can also be used to align vinyl letters on a large job. Page 35 Tools and Tool Handling 27 OFF-CENTER HOLES The second keyway holds the tool at 11 degrees off-center to the direction of tool travel. Using the pounce wheel in the angled position causes the points to drag slightly as the wheel moves forward. This produces larger, slightly elongated holes suited for heavy or clay-coated paper and for bold dusting applications. PLOTTER SPEED In the straight (aligned) position, the pounce wheel works best at reduced plotter speeds. Page 36 28 GS750 plus and 6. Adjust, if necessary, for paper thickness or desired hole size. Reduce plotter speed if pouncing small holes. POUNCE WHEEL REPLACEMENT One pounce wheel supplied is installed in the tool holder, and a spare is included in the tool kit. To replace the pounce wheel 1. Using the Allen wrench from the Tool Kit, remove the hex screw that serves as the wheel's axle. 2. Remove the old wheel. Position the new wheel in the holder. 3. Page 37 Tools and Tool Handling 29 Knife Holder and Blades Gerber blades are extremely wear-resistant. In testing, over 10,000 one-inch letters were cut using a single blade before testing was discontinued with the blade still cutting satisfactorily. Other blade manufacturers have attempted, unsuccessfully, to duplicate this cutting precision and durability.

    Gerber warrants plus only when Gerber blades are cutting quality of the GS750 used. Page 38 30 GS750 plus KNIFE HOLDER INSTALLATION The GS750 plus comes two different types of knife holder. Swivel Knife - Used to cut all but the thickest materials, such as sandblast stencil, at high speed. ! Tangential Knife - Used to cut all materials, including sandblast stencil. Page 40 32 GS750 plus BLADE REPLACEMENT Five carbide knife blades are included with the GS750 plus: ! ! ! ! one installed in the tangential knife holder two tangential knife spares one installed in the swivel knife holder one swivel knife spare Extra blades and special angled blades for sandblast vinyls are available from your Gerber distributor. WARNING: The blade is very sharp. Take care when handling the knife holder and blade. CAUTION: Blades are fragile and can break. Do not use tools to handle new blades. Page 41 Tools and Tool Handling 33 To adjust the tangential blade The knife blade holder assembly includes a small metal plate called a shoe, which acts as a cutting depth stop to prevent the knife blade from cutting through the vinyl backing material. If the tool force setting is correct, but the weed does not peel up easily, or letters peel up with the weed, adjust the shoe to expose more of the blade instead of increasing the tool force setting. Page 42 34 GS750 plus 2. Turn the eccentric nut by hand, or use a small wrench, to expose more or less of the knife tip. Note: Do NOT use a micrometer or calipers to measure the vertical distance; it may damage the knife blade tip. 3. Change the shoe setting only a bit at a time so that the adjustments are made in a continuous direction, rather than back and forth. 4. Make test cuts until the adjustment is satisfactory. To replace and adjust the swivel knife blade 1. Page 43 Tools and Tool Handling 35 To test the swivel knife for proper depth 1. Using a scrap piece of vinyl, trace a cutline by hand with the tool you have adjusted. 2. Weed the test cut.


    votre commentaire


    Suivre le flux RSS des articles de cette rubrique
    Suivre le flux RSS des commentaires de cette rubrique